Peristaltic pumps

Filter

 Peristaltic pump tubing, Tygon® LMT-55 with 3 colour-coded bridges

Saint-Gobain

With 3 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe....

 Analog Pump drive Hei-FLOW Core 120

Heidolph Instruments

Feed pump for standard applications. The speed is adjustable with the analog control knob and stays constant even under changing loads.

  • Smooth start operation prevents from spills and splashing media
  • Feed direction reversible
  • For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
  • Optional footswitch to operate pump drive in closed fume hoods and to facilitate filling operations
  • Pump heads with convex rollers for cell protection are available for use in cell biology
...

 Analog Pump drive Hei-FLOW Core 600

Heidolph Instruments

Feed pump for standard applications. The speed is adjustable with the analog control knob and stays constant even under changing loads.

  • Smooth start operation prevents from spills and splashing media
  • Feed direction reversible
  • For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
  • Optional footswitch to operate pump drive in closed fume hoods and to facilitate filling operations
  • Pump heads with convex rollers for cell protection are available for use in cell biology
...

 Chemistry Pump Units and Vacuum Systems

VACUUBRAND

Compact design, ready to use, no set-up required. Constructed in chemically resistant materials. Quiet operation.

  • 100% oil-free pumping of gases
  • gas ballast as standard for working with condensable vapours
  • good vacuum even with gas ballast
  • high vapour tolerance for water and solvents
  • long service life, low maintenance
...

 Compact peristaltic pumps MS-CA

Ismatec

Flow rate 0.021 to 26ml/min. Simple Click"n"go mini tubing assembly cartridges.

  • 3-stop colour-coded tubing
  • fixed-speed motor
  • Dimensions MS-CA2 (W x D x H): 88 x 135 x 125mm
  • Dimensions MS-CA4 (W x D x H): 88 x 135 x 145mm
...

 Laboratory peristaltic pumps, PLP

Behr

The behrotest peristaltic pumps PLP are suitable for the transport of watery solutions / non aggressive applications.
They find their application in the laboratory, the food industry as well as in the analytical, medicinal or biological field.
The RPM (rotation per minute) can be adjusted manually and the flow direction can be amended....

 Luer Lock Hub Tubing Assemblies, 1 Hub, 300 mm

Hamilton Bonaduz

Assemblies and Tubings
Hamilton Luer Lock tubing assemblies are ideal for quickly connecting and disconnecting components with male luer locks suitable for micro fluidic applications. Hamilton offers a wide varitey of chemically inert tubing assemblies for specific fluid applications. Different gauges, lengths, hub assemblies, and fittings are available according to standard or customer specification. To build your own assemblies, Hamilton offers fitting kits and tubings. Hamilton fittings and adapters are installed finger tight and provide leak tight seal rated to 0.6 MPa....

 Laboratory peristaltic pumps FH10

Thermo

  • Simple, fast tubing changes
  • Fixed occlusion eliminates adjustment after tubing changes and assures operation against pressure up to 30 PSIG
  • Contamination free pumping fluid contacts only the tubing material
  • Controls are mounted on front panel with a separate single-turn speed control
  • Flow direction switch with center "OFF" position
  • Green LED power "ON" indicator
  • "Prime" button runs pump at maximum speed to rapidly prime or flush tubing
  • Reversible pump direction permits purging of tubing prior to use
  • Flow rates less than 2 ìl/min to 105 ml/min
  • Pressure up to 2.5 bar (30 PSIG)
  • Accurate and repeatable flow delivery
  • Filtration, up to 60 PSIG
  • Address a wide range of critical applications with tubing materials that are approved to USP class VI, FDA and NSF standards
  • Accommodates all sizes and formulations of microbore flow rated tubing ergonomic design
  • Space efficient low profile, stackable design
  • Remote capability actuate unit with a foot switch or contact closure
...

 Multi-channel Pumps for Pump drives Hei-FLOW

Heidolph Instruments

  • These pump drives are able to be configured for multi-channel use: Value 01, Advantage 01, Precision 01
  • Increased output by running up to 12 individual cassettes on one single pump drive and pump head system
  • Separate metering into multiple vessels with different feed rates at the same time by using different tubing dimensions to adjust flow rates
  • Easy and quick tubing change
  • In addition to standard pump heads which feature a 4 roller system, 8 roller pump heads are available for low pulsation
  • Easy change of cassettes, even during operation
  • Cassettes adjustments and changes are simple due to click system
  • With possibility to upgrade the pump drive with an adapter for multi-channel operation
...

 Accessories for Pump Drive Hei-FLOW

Heidolph Instruments

...

Add to shopping cart