Drum pumps

For rapid and clean emptying from cans, drums and small barrels up to 60L.

• Precise dosing, without dripping
• Pump connection suitable for 64mm dia. (BSI) container threads
• stepless length adjustment of immersion tube
• Threaded adapters for most commercially-sold containers available
• Not suitable for HCl

Transparent with stopcock. Simple to use, suitable for occasional dispensing of non-aggressive liquids from a higher drum to a lower vessel, following the siphoning principle.

Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.

• Good pump capacity
• Foodsafe

• For small containers, up to 10 l
• Universal bungs made of soft PVC, for container openings of 20 – 36 mm
• For weak acids, alkalis and detergents

When dispensing combustible/explosive liquids pump, both dispensing and filling drum involved in the process must be sufficiently earthed, in order to prevent ignition or explosion through electrostatic discharges. Antistatic set, includes three colour-coded connecting cables with clamps, supplied complete in plastic case.

The manual pressure pump is ideally suited for drawing off, decanting and emptying canisters and barrels. The hand pump is used to create excess pressure that forces the liquid out of the container. The stopcock also allows extraction of small quantities of liquid. The PumpMaster container pump is mounted on the container using a flexible stopper with a variable and adjustable diameter. No special thread adapters are required. PumpMaster fits all commercial container openings with a diameter from 46.5 mm to 60 mm. The immersion tube has a length of 95 cm and it can be shortened depending on the size of the container.

Scope of supply: Drum pump, three bungs in different sizes

Adapter set consisting of:

• 2"" Coarse thread, Mauser, green
• 2"" coarse thread, Tri-Sure^®, brown
• 2"" Fine thread steel drum, blue
• DIN 60, black
• DIN 51, black

For contamination-free removal of organic solvents and flavouring agents. Can be completely closed off with two ball valves so that no dangerous vapours can escape after dispensing. Electrostatic charge can be dissipated through the accessory antistatic set (please order separately).

• Medium-contacting parts are made of stainless steel (1.4301) and PTFE
• For containers up to 60 litres
• Suitable for containers with R 2"" thread
• The solvent pump for tinfoil canisters has a connector thread for pull-out spouts

• For ultrapure and aggressive liquids
• Made of solid, pure white PTFE, giving an excellent chemical resistance to all media (with the exception of elemental fluorine)
• With stopcock to prevent the escape of harmful or hazardous liquids and unwanted drips
• Barrel screw joints are availabe as accessories

Stainless steel V2A and PTFE.
For safe dispensing of liquids with a low flash point . Electrostatic charge can be dissipated through accessories antistatic set and drum screwthread connection. Not suitable for acetone.