Heating-Thermostats

Suitable for use in microbiological, histological, clinical, industrial and environmental laboratories. Various types of optional heating blocks are available as accessories for the LLG-uniBLOCKTHERM.

• Digital control with LED display
• Can be used up to 120 °C
• For timer and continuous operation
• Can be used with different heating blocks
• 1 x block unit
• With overheating protection

Scope of supply: LLG-uniBLOCKTHERM, removal tool, lid

Please order heating blocks separately.

Specifications
Temperature range:	RT ... 120 °C
Temperature uniformity:	±0.5 °C
Temperature accuracy:	±0.5 °C
Timer: Block material:	0 ... 99:59:00 min Aluminium
Dimensions (W x D x H):	175 x 290 x 85 mm
Weight:	3 kg
Power supply:	220 ... 240 V, 50/60 Hz
Warranty:	3 years

Accessories  Accessories  Accessories  Accessories

For use with Immersion circulator LX and MX.

Working temperature range °C	+10° … +150 °C
Temperature stability °C	± 0,01
Heating capacity kW	2,2
Pump capacity:	14,7 l/min / 0,3 bar

Drain syphon SY1: For the rapid draining of baths.

Heat exchange coil CW5: For use with precision and general purpose stirred baths. Temperature range 2 °C above coolant temperature. Coil diameter/l mm 77/55, pipe bore inlet/outlet 7mm.

PP spheres PS20: Between operating temperatures 60 °C and 100 °C and below room temperature a lid or layers of polypropylene spheres can be used. Above 100 °C a lid must be used.

Stainless steel bridge for the new CORIO™ series.

CORIO™ CD Heating Circulators for internal and external temperature applications with stainless steel baths for working temperatures from 20 °C to 150 °C. CORIO™ Heating Circulators feature professional technology for demanding applications. These units facilitate internal temperature control in the bath tank or control of externally connected applications.

• For internal and external applications
• Bright, white, easy to read display
• Very quiet
• Pump change-over between internal and external circulation
• USB connection
• High-quality bath tanks made of stainless steel with bath lid and drain tap
• Integrated cooling coil for counter-cooling

Working temperature range:	20 ... 150 °C
Temperature stability:	± 0.03 °C
Heating capacity:	2 kW
Flow rate:	15 l/min
Pressure:	0.35 bar

Accessories  Accessories Tubing insulations for refrigerated and heating circulators Accessories  Accessories  Accessories  Accessories

Combinations of immersion circulators and insulated refrigeration baths are low-cost solutions for direct thermoregulation within the temperature range -20/-30°C to +200°C. The refrigeration baths operate with natural refrigerants. A pump adapter (optional) can be fitted for thermoregulation of externally closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore suitable for external open thermoregulation applications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the KISS models.

Alternative Thermostatic baths with polycarbonate tanks Alternative Compatible Control Refrigeration Circulators K6

The device is available in single, dual, and four block configurations and provide a broad temperature range up to 150 °C, which makes them useful for a variety of applications in molecular biology, histology, clinical, environmental, and industrial laboratories.

• Single, dual and four block capacity
• Dual display
• USB connectivity enables traceability of data
• Molded block chamber

Please order blocks separately.

Specifications
Temperature range: Temperature uniformity: Temperature resolution: Temperature accuracy:	Ambient +5 to +150°C, adjustable in 0.1°C steps ± 0.2°C ± 0.1°C ± 0.3°C
Temperature control:	Microprocessor
Timer:	1 ... 99h 59 min or continuous
Block material:	Aluminium
Dimensions (W x D x H)
Single / Dual Block: 4 Block:	210 x 290 x 120 mm 210 x 390 x 120 mm
Weight
Single / Dual Block: 4 Block:	3.2 kg 4.4 kg
Power supply:	230 V, 50/60 Hz

Accessories Accessories for Dry Baths, AccuBlock™ Alternative Block Heaters, analogue and digital, BH-200 series

Designed for applications that require repeatable results and superior temperature stability. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points, and a wide variety of other laboratory procedures. Integral support rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Each of the models accept separate interchangeable modular blocks, accommodating various tube sizes from 0.2 ml microtubes to 50 ml centrifuge tubes. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact for maximum heat retention.

• Microprocessor Control
• LED Display
• Temperature Calibration Mode
• Caution Hot Indicator
• Audible Alarm

Without blocks. Please order separately.

Specifications
Temperature range: Temperature stability at 37 °C:	ambient +5 to 120 °C ±0.2 °C
Uniformity within block at 37 °C:	±0.2 °C
Uniformity across blocks at 37 °C / Heat up time to 100 °C
1 block: 2 blocks: 4 blocks: 6 blocks:	- / 45 min ±0.1 °C / 50 min ±0.2 °C / 60 min ±0.3 °C / 65 min
Permissible ambient conditions:	18 to 33 °C
Power supply:	230 V, 50/60 Hz

Accessories Temperature Probe Kit for Dry Block Heaters Accessories Blocks for Microcentrifuge and Centrifuge tubes for Dry Block Heaters Accessories Blocks and Combination Blocks for Standard Test Tubes for Dry Block Heaters Accessories Blocks for Vials for Dry Block Heaters Accessories Blocks for PCR vessels and 96/384 well plates for Dry Block Heaters Accessories Cuvette Block for Dry Block Heaters Accessories Accessories for Dry Block Heaters

For internal and external applications. The thermoregulators with maximum flexibility can be mounted with the sturdy bath clamp to any bath up to 50 liters. Equipped with USB interface, also available with optional analogue (extra code A) or RS232 (extra code D) interface.

• Easy switching between internal and external circulation (optional pump set, Cat. No. 4.658 027)
• Large colour TFT Display
• Easy to operate via central controller
• Integrated programmer for 8 x 60 program steps
• Class III (FL) acc. to DIN 12876-1
• Continuously adjustable, powerful pressure pump
• External Pt100 sensor connection
• Installation cooling coil for counter-cooling, Cat No. 4.658 026, available separately

Bath clamp included.

Specifications
Operating temperature range:	20...200 °C
Temperature stability:	0.01 °C
Heating capacity:	2 kW
Flow rate:	8 ... 27 l/min
Pump capacity:	0.1 ... 0.7 bar
Dimensions (W x D x H):	130 x 160 x 360 mm
Weight:	2.5 kg
Power supply:	200-230 V, 50/60 Hz

Accessories Heating Circulators Accessories Accessories Pump set for immersion circulators CORIO™ and DYNEO™ Accessories  Accessories  Accessories

E-grade - innovative activation keys for the functionality to suit your budget and process requirements

Every application requires particular functions. If the circulator is to be used in a range of applications it will generally require greater functionality. The required functionality grows with the complexity of the application. The innovative "E-grade" has the answer. Models with the Pilot ONE Controller have a comprehensive range of functions suited to the classical temperature control applications. The E-grade allows the functionality to be extended at any time to suit new process requirements and budget. E-grade stands for electronic upgrade and it is simple to do: To extend the functionality a unit specific code is entered via the controller. This code is specific to the serial number of the unit and is either already entered at the factory for new units or it can be activated at a later date. The code is sent by email. There is no requirement for a hardware or software update.

The E-grade "Explore" for Unistats is more than just another functions package. It makes important information available to users of Unistat temperature control systems. Temperature values and temperature differentials as well as for the actual heating power, cooling power and pump power within the system are displayed on the touch-panel. E-grade "Explore" is an evolution of the existing Unistat technology. Existing sensors are utilised to make important process temperature and power data visible. In addition to making the data visible on the display of the device, it can also be accessed via the digital interfaces for further processing.

Application examples for E-grade^® "Explore":

• Process and product development and optimisation
• Use-Tests of raw materials, quality control
• Enhanced data collection for scale-up trials

For precise temperature control of internal and external applications from 3 to 26 litres.

• Simple control of complex applications
• Infinitely adjustable, extremely powerful pressure and suction pump
• Large, high-resolution TFT touch display with multilingual user interface
• Medium-contacting parts made of stainless steel
• Integrated programmer
• External Pt100 connection
• USB interface
• RS232 interface
• Ethernet interface
• Analogue interfaces (optionally)
• Classification III according to DIN 12876-1
• High quality thermal insulation of the bath tanks
• Integrated drain cock for easy and safe emptying

Specifications:	MS-BC // MX-BC
Temperature stability:	± 0.01 °C
Flow rate:	16 ... 31 l / min
Pump pressure:	0.24 ... 0.92 bar
Suction pressure:	0.03 ... 0.4 bar
Heating capacity:	2000 W // 3000 W
Permissible ambient temperature:	5 ... 40 °C
Power supply:	230 V / 50 ... 60 Hz

Accessories  Accessories Tubing insulations for refrigerated and heating circulators Accessories  Accessories  Accessories  Accessories  Accessories  Accessories  Alternative Refrigerated circulators MAGIO™ MS

Heating bath circulators are suitable for temperatures up to 200 °C or 300 °C depending on model. The Compatible Control models have a continuously variable pressure and suction pump. The pump pressure can be controlled with an optional pressure sensor, and so can protect your valuable glass-ware from breakage. The machines are preferred and used for temperature control of externally connected applications. Additionally there is the ability to control the temperature of objects placed directly in the open bath.

Temperature control range CC-205B / KISS-205B: CC-304B / CC-308B / CC-315B:	(20) 45 ... 200°C 28 ... 300°C
Safety class:	FL, III
Stability to DIN 12876 CC-205B / CC-304B / CC-308B / CC-315B: KISS-205B:	0.02K 0.05K

Accessories Immersion circulators KISS E and CC-E

CORIO™ C Open Heating Bath Circulators for internal temperature applications with stainless steel bath tanks for working temperatures from 20 °C to 100 °C, complete set with bath tanks.

• For internal applications
• Bright, white, easy to read display
• Whisper quiet
• Integrated drain screw (except for B5)

Working temperature range:	20 … 100 °C
Temperature stability:	± 0.03 °C
Heating capacity:	2 kW
Flow rate:	6 l/min
Pressure:	0.1 bar

Accessories Flat bath covers for bath tanks, stainless steel Accessories Test tube racks for water baths PURA™, shaking water baths SW and heating circulators CORIO™ Accessories  Accessories  Accessories  Accessories

CORIO™ C Open Heating Bath Circulators for internal temperature applications with transparent bath tanks for working temperatures from 20 °C to 100 °C.

• For internal applications
• Bright, white, easy to read display
• Whisper quiet

Working temperature range:	20 … 100 °C
Temperature stability:	± 0.03 °C
Heating capacity:	2 kW
Pump capacity:	6 l/min / 0.1 bar

Accessories Test tube racks for water baths PURA™, shaking water baths SW and heating circulators CORIO™ Accessories  Accessories  Accessories Flat bath covers for bath tanks, stainless steel Accessories  Accessories

Good things come in small packages! Thanks to their low bath volumes the models CC-104A und KISS-104A (with polycarbonate bath) as well as the CC-202C and KISS-202C (with stainless steel bath) are especially suitable for controlling the temperature of small external applications. All models are fitted with rear mounted M16 x 1 pump connections as standard. Models with the Pilot ONE have a speed regulated pressure/suction pump. The temperature constancy, in accordance with DIN12876, is 0.02 K with the Compatible Control models and 0.05 K for the KISS models. Models CC-202C and KISS-202C are fitted with an integrated cooling coil as standard. With the models CC-104A and KISS-104A the cooling coil is an optional extra.

Temperature range CC-104A/KISS-104A: CC-202C/KISS-202C:	(15) 25 to 100 °C (-30) 45 to 200 °C
Temp. Stability to DIN 12876 CCmodels: KISS models:	0.02 K 0.05 K
Safety class:	FL, III
Bath depth:	150 mm
Heating capacity:	2 kW

Accessories Immersion circulators KISS E and CC-E Alternative Thermostatic baths with polycarbonate tanks Alternative Compatible Control Refrigeration Circulators K6

The insulated stainless steel baths are suitable for use up to 200°C. All models have a bridge-mounted immersion circulator. With a pump adapter, this combination can also be used with externally closed and externally open (with option level control) applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications.

Stability to DIN 12876:
CC models:	0.02K
KISS models:	0.05K
Max. temp.:	200°C
Safety class:	FL, III

Accessories Immersion circulators KISS E and CC-E Accessories Function upgrade for Huber circulators

CORIO™ CD Open Heating Bath Circulators for internal and external temperature applications with stainless steel bath tanks for working temperatures from 20 °C to 150 °C. The Open Heating Bath Circulators of the new CORIO™ series feature high-quality bath tanks made of stainless steel and with pump connections.

• For internal and external applications
• Bright, white, easy to read display
• Very quiet
• Pump change-over between internal and external circulation
• USB connection
• Integrated drain screw (except for B5)

Working temperature range:	20 ... 150 °C
Temperature stability:	± 0.03 °C
Heating capacity:	2 kW
Flow rate:	15 l/min
Pressure:	0.35 bar

Accessories Flat bath covers for bath tanks, stainless steel Accessories Test tube racks for water baths PURA™, shaking water baths SW and heating circulators CORIO™ Accessories  Accessories Tubing insulations for refrigerated and heating circulators Accessories  Accessories  Accessories  Accessories  Accessories

CORIO™ CD Open Heating Bath Circulators for internal and external temperature applications with transparent bath tanks for working temperatures from 20 °C to 100 °C. The Open Heating Bath Circulator of the new CORIO™ series feature durable, high-quality transparent bath tanks and pump connections.

• For internal and external applications
• Bright, white, easy to read display
• Very quiet
• Pump change-over between internal and external circulation
• USB connection
• Class III (FL) according to DIN 12876-1

Working temperature range:	20 ... 100 °C
Temperature stability:	± 0.03 °C
Heating capacity:	2 kW
Flow rate:	15 l/min
Pressure:	0.35 bar

Accessories Flat bath covers for bath tanks, stainless steel Accessories Test tube racks for water baths PURA™, shaking water baths SW and heating circulators CORIO™ Accessories  Accessories Tubing insulations for refrigerated and heating circulators Accessories  Accessories  Accessories  Accessories  Accessories

CORIO™ CP thermoregulators are capable to control the temperature of external applications in combination with an optional pump set. Suitable for bath vessels with a volume of up to 50 l.

• For internal and external applications (accessories required)
• Bright, white, easily visible display, even from a distance
• Very quiet
• Easy operation
• Low-level warning system
• Pump switch for internal and external circulation
• Powerful, continously variable pump
• USB connection
• RS232 interface
• Class III (FL) according to DIN 12876-1

Scope of supply: Thermoregulator, mains power cable, bath attachment clamp

Specifications
Setting accuracy:	0.01 °C
Pump output:	8 ... 27 l/min
Pump pressure:	0.1 ... 0.7 bar
Immersion depth:	75 ... 165 mm
Max. viscosity:	50 cSt
Timer:	0 ... 999 min
Permissible ambient temperature:	5 ... 40 °C
Dimensions (W x D x H):	132 x 160 x 362 mm
Weight:	2.5 kg
Power supply:	230 V/50 Hz

Accessories Pump set for immersion circulators CORIO™ and DYNEO™ Accessories  Accessories  Accessories

Immersion circulator for all kinds of water baths. It clamps securely to both straight and curved tank walls. The patented, closed housing protects the user and the heating element.

• Temperature stability +/- 0,07 °C
• Minimum working depth 7,5inch/19 cm
• Large LCD-display
• Display resolution 0,1 °C
• Displays actual and set point temperature simultaneously
• Integrated pump and heater protection
• Integrated over-temperature protection
• Low liquid level protection
• Included clamp for straight and curved tank walls
• Maximum pressure 0.12 bar / 1.8 psi with a maximum pressure flow rate of 11.9 l/min

Accessories Open Tanks

The Huber circulators are split into two product lines, the Compatible Control models and the simpler KISS models. Both model lines represent classically constructed laboratory circulators with open baths. Baths and circulators for heating applications up to +300°C are available, as well as models for heating and cooling applications from -90°C to +200°C. Immersion or bridge circulators are suitable for thermal control of existing baths. The Ministat, the smallest cooling and heating circulator in the world, is the first choice for operation in fume-hoods or integrating into systems.

Circulators with Pilot ONE Controller
Models with Pilot ONE Controller convincing in practice with their highly precise temperature control and a professional range of functions even in the basic version. The electronic upgrade function "E-grade" allows a simple and low cost expansion of functions at any time. Operation is simple using large colour displays, an easily understandable menu and an individually customisable display. Models with the Pilot ONE have powerful pressure and suction pumps with continuously variable speed control for adjusting circulation to the bath in use. Further connections are available via the optional Com.G@te, e.g. RS232 and RS485, analogue interface 4 to 20mA or 0 to 10V, standby signal and programmable alarm.

Circulators using the KISS Controller
The functions of models with the low price KISS controller concentrate on the essentials. KISS models are suitable for numerous typical laboratory applications, such as temperature control of samples, analysis, materials testing, as well as the external temperature control of test equipment or experimental constructions. The machine achieves a temperature stability of +/- 0.05°C and are fitted with an over temperature and low fluid level protection. The safety systems are according to class III/FL (DIN 12876) for use with flammable fluids.

Advantages and Functions (model dependent):

• Working Temperatures from -90°C to +300°C
• Models for internal and external temperature control
• High heating and cooling powers up to 7kW
• Powerful controllable circulation pumps
• Function expansion with the E-grade system is available at any time
• High precision cascade temperature control
• Large and full colour 5,7" TFT touchscreen
• Programmer with calendar / clock function
• Extended range of languages including a selection of European and Asian
• Comprehensive warning and safety functions
• Large, bright OLED display
• Simple operation via a plain text menu
• RS232 and USB Interfaces
• Safety class 3 (FL) to DIN 12876
• Internal and external temperature control

Immersion circulators are the basis of many combinations of polycarbonate and stainless steel baths. Together with a cooling bath it is possible to get exact and reproducable temperatures down to -30 °C. All models are equipped with a powerful suction pressure pump and comply with safety class III (FL) for use with flammable liquids. Pump adapters for external tempering and cooling coils for cooling water connection are available as accessories.

Temp. control range °C:	(-30) 25 to 200°C
Safety class:	FL, III
Heating capacity kW:	2kW
suction max. (CC-E): suction max. (CC-E xd): suction max. (KISS E):	22 l/min / 0,4 bar 17 l/min / 0,25 bar 10,5 l/min/0,17 bar
Immersion depth (CC-E, KISS E): (CC-E xd):	150mm 195mm

Accessories Function upgrade for Huber circulators

Permits the remote set-up and programming of thermostats with interface from a PC. Real-time temperature / time profile and graphic representation of processes. Profile documentation and programme memory on disk. Minimum requirements: Microsoft Windows XP, Vista (32/64 bit), or Windows 7 (32/64 bit). Pentium III / Celeron 866 MHz or equivalent.

Accessories Thermostatic controllers Optima™ T100 / TC120 Accessories Thermostatic controllers Optima™ TX150 / TXF200

An economical alternative to integrated heating baths for liquid temperatures up to 150°C. Controller bridge rests securely on the bath, yet is easily removed for tank cleaning. Generous bath opening provides ready access to samples and the included bath cover improves stability.

• Working temperatures from ambient +10° up to 150°C
• Advanced Programmable, Advanced Digital or MX Temperature Controller
• 6, 10, 20 or 28 liter reservoir
• DuraTop™ Chemical Resistant Bridge, Swivel 180™ Rotating Controller (on Advanced Programmable and Advanced Digital models)
• Lidded opening for optional cooling coil (10, 20 and 28 liter models)
• External circulation capability
• Complies with DIN 12876-1 Class I safety requirements for use with non-flammable liquids
• Incl. bath cover

Working temperature range:	+10° … +150 °C (+135 °C, MX type)
Temperature stability:	± 0.01 °C (± 0.07 °C, MX type)
Heating capacity:	2.2 kW (1.1 kW, MX type)
Pump capacity:	16.7 l/min / 0.25 bar (AP, AD type) 11.9 l/min / 0.12 bar (MX type)

The effective liquid depth is reduced in order to place small or shallow containers in the bath.

Accessories Lids for water baths Optima™ series Accessories Accessories for water baths Optima™ series Accessories Test tube racks for water baths Optima™ series

• With graduation
• Laboratory flange LF
• Groove
• Flat bottom
• Two connectors with threads GL 14 or GL 18
• Made of DURAN^® tubing

Other sizes on request.

Alternative Reaction vessels, cylindrical, with thermostatic jacket and withdrawal valve

The refrigerated baths K12 to K25 use natural refrigerants. The immersion circulator controls the temperature. In combination with an immersion circulator, these refrigerated baths can cover the complete temperature range. The refrigeration system offers active cooling, in continuous operation over the complete working range.

Temp. control range: K12 / K15: K20 / K25:

-20 to 200°C -30 to 200°C

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

-Working Temperature: From -40° up to +200°C

• Temperature Stability: ±0.005°C
• Time/temperature programming
• Intuitive 4.3" (10.9 cm) SmartTouch display
• 11 languages: French, German, Spanish, Chinese, Arabic, English, Portuguese, Russian, Hindi, Italian, Korean
• Variable speed pump with open- and closed-loop external circulation capability
• Pump pressure max. 3.6 psi (0.25 bar)
• On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, remote on/off and external temperature probe
• Event scheduling (time and date) with real-time clock
• Review temperature trends for up to 10 days
• Multiple selectable "home" screens
• On-screen help
• Automatic and/or user-adjustable performance optimization
• Safety class III
• 10-point calibration capability

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

-Working Temperature: From -30° up to +170°C

• Temperature Stability: ±0.04°C
• Large 3.75" universal icon and English display
• Pressure Pump with two speeds
• Pump pressure max. 2.9 psi (0.20 bar)
• On-board connectivity: RS-232 serial output
• Adjustable over- or under-temperature
• Automatic performance optimization
• Safety class I
• Single-point calibration capability

Stainless steel bath tanks (insulated) for immersion thermostats CORIO™.

Accessories Flat bath covers for bath tanks, stainless steel Accessories

High efficiency stainless steel (ST) tanks (range -15 °C to 200 °C). Drain tap included on ST12, ST18, ST26, ST38. Raised feet for carrying repositioning and retort access. Accessory polypropylene spheres or a lid must be used at temperatures between 60 °C and 100 °C. Above 100 °C only a lid must be used. Accessory cooling is required for temperatures below ambient.

Please order lid and PP spheres separately.

Accessories Lids for water baths Optima™ series Accessories Accessories for water baths Optima™ series Accessories Raised shelves for water baths Optima™ series Accessories Test tube racks for water baths Optima™ series Accessories LLG-Floating pellets, PP Alternative Tanks Optima™ series, plastic

Manufactured in stainless steel, with lifting handles. Available for test tubes with an external diameter of 10 to 13 mm, 16 to 19 mm, 24 mm or 30 mm as well as for 0.5 ml or 1.5 ml microcentrifuge tubes.

QR racks can only be used with 5 litre baths.
VR racks can only be used with 12, 18, 26 and 38 litre baths.

Max. number of racks per bath:
5 litres: S5, ST5, P5	1 x QR
12 litres: S12, ST12, P12	2 x VR
18 litres: S18, ST18, P18	4 x VR
26 litres: S26, ST26	4 x VR
38 litres: S38, ST38	6 x VR

Accessories Thermostatic controllers Optima™ T100 / TC120 Accessories Thermostatic controllers Optima™ TX150 / TXF200 Accessories Tanks Optima™ series, stainless steel Accessories Tanks Optima™ series, plastic Accessories Lids for water baths Optima™ series Accessories Accessories for water baths Optima™ series Accessories Raised shelves for water baths Optima™ series

The CORIO™ C Immersion Circulator is the basic model of the CORIO™ circulator portfolio. The bath attachment clamp is included in delivery and facilitates mounting of the circulator on any bath tank up to 30 liters. With a few simple steps you can install a pump set onto the CORIO™ CD Immersion Circulator. In no time at all, your circulator is ready for temperature control of an external application.

• Precise temperature control
• For internal standard applications
• Immersion depth: 7.5 to 16.5 cm
• Bright, white, easy to read display
• Whisper quiet
• Easy operation

CORIO™ C

• For bath tank up to 30 liters
• Class I (NFL) according to DIN 12876-1
• Circulation capacity 6 l/min at 0.1 bar

CORIO™ CD

• For bath tank up to 50 liters
• Pump change-over between internal and external circulation
• USB interface
• Class III (FL) according to DIN 12876-1
• Circulation capacity 15 l/min at 0.35 bar

Delivery without bath please order separately.
To adapt the CORIO™ Immersion Circulator to your individual application we offer a comprehensive range of accessories (racks, bath lids, and more).

Accessories Heating Circulators Accessories Accessories Pump set for immersion circulators CORIO™ and DYNEO™ Accessories Stainless steel bath tanks for immersion thermostats CORIO™ C / CD Accessories  Accessories

The transparent polycarbonate baths are suitable for use up to 100°C. An immersion thermostat is mounted on the bath bridge for all models. With a pump adapter, this combination can also be used with external, closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications.

Temperature max.:	100 °C
Temp. Stability at 70 °C to DIN12876
KISS E: CC-E:	0.05K 0.02K
Safety class:	FL, III
Bath depth:	150mm

Accessories Immersion circulators KISS E and CC-E Accessories Function upgrade for Huber circulators

Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use.
The two general purpose heating circulators offer excellent temperature stability and uniformity with a cooling/heating range of 0 °C to 100 °C* (T100) and -15 °C to 120 °C* (TC120).
*For using at or below room temperature you need additional flow coolers C1G (9.920 765) or C2G (9.920 766).

Features:
T100: Visual alarm, 2 point recalibration, fixed over temperature cut-out
TC120: Visual and audible alarm, timer, 2 point recalibration, adjustable over temperature cut-out, pump for external circulation

T Clamp: For attaching the thermostats to any vertical sided tank with a maximum wall thickness of 35 mm for rectangular tanks, 30 mm for circular tanks (300 mm diameter), and a capacity of up to 50 l.

Models with clamps available on request.

Specifications Temperature range with stainless steel tank
T100: TC120:	0°C to +100°C* -15°C to +120°C*
Stability / Uniformity (DIN 12876) at 70°C:	±0.05°C / ±0.1°C
Setting resolution:	0.1°C
Display:	4 digit LED
No. of pre-set temperatures:	3
Recalibration points:	2
Heating power (230V):	1.3 kW
Power supply (230V / 50-60Hz):	1.4 kW
TC120 only:
Timer:	1 to 6000 mins
Pump max. pressure:	210 mbar
Flow rate max.:	16 l/min

Accessories Labwise software for Thermostatic controllers Optima™ series Accessories Tanks Optima™ series, stainless steel Accessories Tanks Optima™ series, plastic Accessories  Alternative Thermostatic controllers Optima™ TX150 / TXF200

Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use.
The two advanced heating circulators feature a modern, icon driven programming interface and full colour display.

For using at or below room temperature you need additional flow coolers C1G (9.920 765) or C2G (9.920 766).

Features:
Visual and audible alarm, timer, 5 point recalibration, adjustable over temperature cut-out, pump, external probe, progammable, relay, menu system, program storage, USB/RS-232 port

Models with clamps available on request.

Specifications Temperature range with stainless steel tank
TX150: TXF200:	RT + 5 °C ... 150 °C RT + 5 °C ... 200 °C
Stability / Uniformity (DIN 12876) at 70 °C:	±0.01 °C / ±0.05 °C
Setting resolution:	0.1 °C (0.01 °C with Labwise)
Display:	QVGA TFT
Timer:	1 min to 99 hrs 59 mins
No. of pre-set temperatures:	3
Recalibration points:	5
Heating power (230 V): Power supply (230 V / 50-60 Hz):	1.9 kW 2.0 kW
Interface:	USB and RS232
Pump max. pressure
TX150:	310 mbar
TXF200:	530 mbar
Flow rate max.
TX150: TXF200:	18 l/min 22 l/min (adjustable)

Accessories Tanks Optima™ series, stainless steel Accessories Tanks Optima™ series, plastic Accessories  Accessories Labwise software for Thermostatic controllers Optima™ series Alternative Thermostatic controllers Optima™ T100 / TC120

The Hydro water baths are optimally equipped for every application in the laboratory. With their precise temperature distribution, they are designed for the needs of biological, medical or biochemical laboratories. The H 8 A and H 16 A models are also equipped with a circulation system for optional mixing.

• Interior made of high quality stainless steel
• Applications in the boiling range possible (temperature range: 25 to 100 °C)
• TFT color display for intuitive operation, temperature display in °C and °F
• Programmable timer
• Optical and acoustic alarm in the event of an error

Accessories LLG-Floating pellets, PP Accessories Inserts, stainless steel for Water baths Hydro

Scale ranges from 0° up to 70° Baumé, paper scale with well visible print, shot weighted body, at the bottom pointed end, accuracy ±1 line of scale division, reading below.

Alternative Hydrometers, Baumé Alternative Salinometers, Bischoff type Alternative Hydrometers, relative density (S.G.) Alternative Hydrometers, lime water Ca(OH)2 Alternative Hydrometers, density

Bath liquids.
Use of the appropriate liquids for heat transfer listed here offers many advantages:

• Safe to use, non toxic, and generally odourless formulations
• Resistance to ageing and viscosity changes with low susceptibility to corrosion.

Silicone oils (SIL).
Non-flammable, with long operational life.

Synthetic heat transfer fluids (Synth).
Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.

Viscosity.
For optimal temperature stability the bath fluid must be of low viscosity.

Fire point.
Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its" fire point.

Heating up range.
Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.

Operating temperature range.
Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.

Working temperature range.
The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.

Powerful circulators with strong heating and cooling power for operating temperatures from -25 °C to 200 °C. With speed-controlled pressure and suction pump, suitable for external applications. Very good thermal insulation, therefore particularly fast heating-up times and low heat input at low temperatures. All parameters can be read, monitored and documented via software.

• Connection for external Pt100 temperature sensor and external solenoid valves via Multi I/O connection
• Visual and audible warning functions
• USB/RS 232 interface
• Safety drain valve
• Adjustable safety circuit
• Calibration option

CBC 5 basic
With built-in LED display for controlling and monitoring the device parameters.

CBC 5 control
With removable TFT display for controlling and monitoring the device parameters. The display can be used as a remote control, e.g. in a fume hood.

Specifications
Heat output / cooling output: Power input:	2500 W / 350 W 3000 W
Working temperature: Filing volume:	-25 ... 200 °C 5 ... 7 l
Cooling agent:	230 g R134A
Temperature stability (CBC 5 basic // control):	±0.02 °C // ±0.01 °C
Display resolution (CBC 5 basic // control):	0.1 °C // 0.01 °C
Pump flow rate:	31 l/min
Class / Identification acc. to DIN 12876: IP code:	III / FL IP 21
Dimensions (W x D x H): Power supply:	275 x 490 x 690 mm 100-115 ... 230 V / 50 ... 60 Hz

The digital Dry Block Heater with Heated Lid is designed for applications that require repeatable results and superior temperature stability. These multi-purpose units are ideal for isothermal incubation, enzyme reactions, immunoassays, nucleic acid denaturation and a wide variety of other laboratory procedures. Integral support rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Block heater accepts one microplate block or two separate interchangeable modular blocks, accommodating various tube sizes from 0.2 ml micro-tubes to test tubes or vials up to 85 mm in height. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact with a low density design for exceptional temperature uniformity. The heated lid helps to regulate the temperature and reduce the amount of condensation on sample lids.

• Microprocessor control
• LED-Display
• Temperature Calibration Mode
• Caution Hot Indicator
• Overshoot Protection
• Audible Alarm

Without blocks. Please order separately.

Specifications
Temperature range: Temperature stability at 37 °C:	ambient +5 to 100 °C ±0.2 °C
Uniformity within block at 37 °C:	±0.2 °C
Uniformity across blocks at 37 °C	±0.2 °C
Heat up time to 100 °C:	50 min
Permissible ambient conditions:	18 to 33 °C
Power supply:	230 V, 50/60 Hz

Accessories Temperature Probe Kit for Dry Block Heaters Accessories Blocks for Microcentrifuge and Centrifuge tubes for Dry Block Heaters Accessories Blocks and Combination Blocks for Standard Test Tubes for Dry Block Heaters Accessories Blocks for Vials for Dry Block Heaters Accessories Blocks for PCR vessels and 96/384 well plates for Dry Block Heaters Accessories Cuvette Block for Dry Block Heaters Accessories Accessories for Dry Block Heaters

High wattage, constant-temperature Dry Block Heaters are economical, versatile and compact. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points and a wide variety of other laboratory procedures. Each of the five models accept separate interchangeable modular blocks, accommodating various sample enclosures such as micro-tubes, centrifuge tubes, vials, microplates, and PCR strips or tubes. Each block has a thermometer well for measuring block temperature. Anodized aluminum modular blocks provide superior temperature stability and heat transfer.

• Microprocessor Control
• Adjustment knobs

Without blocks. Please order separately.

Specifications
Temperature range lower / upper range:	ambient +5 to 100 °C / 75 to 150 °C
Uniformity within block at 37 °C:	±0.2 °C
Temperature stability at 37 °C
1 block: 2 blocks: 4 / 6 blocks:	±1.5 °C ±2.0 °C ±2.5 °C
Uniformity across blocks at 37 °C / Heat up time to 100 °C:
1 block: 2 blocks: 4 blocks: 6 blocks:	- / 45 min ±0.1 °C / 50 min ±0.2 °C / 70 min ±0.3 °C / 75 min
Permissible ambient conditions:	18 to 33 °C
Power supply:	230 V, 50/60 Hz

Accessories Blocks for Microcentrifuge and Centrifuge tubes for Dry Block Heaters Accessories Blocks and Combination Blocks for Standard Test Tubes for Dry Block Heaters Accessories Blocks for Vials for Dry Block Heaters Accessories Blocks for PCR vessels and 96/384 well plates for Dry Block Heaters Accessories Cuvette Block for Dry Block Heaters Accessories Accessories for Dry Block Heaters

The right physical weight and fitting is important for high temperature accuracy inside the sample. All blocks are made out of temperature conductible aluminium. Customized blocks on request. All blocks are autoclavable.

Accessories BlockThermostats TH 21 / TK 23 Accessories HeatingThermoMixer MHR 13 Accessories HeatingThermoMixer MHR 23 / MHL 23 Accessories

EK 45 immersion cooler
This portable cooler features a controller with digital temperature LED display, reaching temperatures down to as low as -45 °C. The compact size of the EK 45 is ideal for pairing with counter-cooled applications making it an economical, sustainable alternative for dry ice, liquid nitrogen, and other quick-chill solutions. The small footprint and sleek handle make this unit convenient for setting up as needed with vapor/solvent trapping, Dewar or other benchtop applications. Multiple probe options are available to meet your custom application need.

EK 90 immersion cooler
This more robust cooler is designed to cool to temperatures as low as -90 °C. The EK 90 begins driving immediately down to -90 °C, with the option of controlling the temperature setting on select models via a digital temperature LED display. Similar to the EK 45, this cooler was designed with overall footprint in mind. The capacity to achieve such low temperatures in such a quick timeframe makes this unit ideal for the direct contact cooling method used in material characterization, as well as cooling reactors, Dewars, and any vapor/solvent trapping applications. Multiple probe options are available meet your custom application need.

Heated bath circulators with stainless steel bath for operating temperatures up to 250 °C. Easy switching between internal and external control. With integrated cooling coil and powerful pressure and suction pump in a housing made of temperature and chemical resistant plastic. The large surface of the radiator allowes for an optimum heat exchange, even heating of the medium and very fast heat-up times. The bath is easy to clean and has a drain valve with hose connection on the front for draining the bath. Can be operated with flammable liquids.

• Adjustable safety circuit
• Simple menu navigation with push buttons and rotary knobs
• Visual and audible warning functions
• USB/RS 232 interface

HBC 5 / 10 basic
With large, easy-to-read LED display.

HBC 5 / 10 control
With removable TFT display for controlling and monitoring the device parameters. The display can be used as a remote control, e.g. in a fume hood. With timer function. A solenoid valve can be connected.

Specifications
Heat output: Power input:	2500 W 2650 W
Working temperature: Operating temperature min.:	Amb. +10 °C ... 200 °C -20 °C
Temperature stability (HBC 5/10 basic // control):	±0.02 °C // ±0.01 °C
Display resolution (HBC 5/10 basic // control):	0.1 °C // 0.01 °C
Pump flow rate: Filing volume:	31 l/min 5 ... 7 l // 8 ... 11 l
Class / Identification acc. to DIN 12876: IP code:	III / FL IP 21
Dimensions (W x D x H) HBC 5 // HBC 10: Power supply:	275 x 500 x 406 mm // 275 x 500 x 456 mm 100-115 ... 230 V / 50 ... 60 Hz

With insulated stainless steel bath tanks, flexible performance and an operating temperature range of up to 200 °C. Temperature control is possible either in the internal bath or in a connected external application.

• Suitable for internal and external applications
• High-quality stainless steel bath vessels with bath lid and drain
• Integrated pump connections M16 x 1
• Integrated cooling coil for counter-cooling
• Bright, white, easily visible display, even from a distance
• Low-level warning system
• Easy switching between internal and external circulation
• Powerful, continuously variable pump
• Pump capacity adjustable from 8 to 27 l/min
• Very quiet
• Rubber feet for secure standing
• USB connection
• RS232 interface
• 3-point calibration
• Class III (FL) according to DIN 12876-1

Scope of supply: Circulator bath, mains power cable, connection box, bath, bath cover, hose connectors 8 and 12 mm

Specifications
Temperature range: Setting accuracy:	20 ... 200 °C 0.01 °C
Temperature uniformity:	±0.02 °C
Pump output:	8 ... 27 l/min
Pump pressure: Heat output:	0.1 ... 0.7 bar 2 kW
Timer: Hose connector inner width:	0 ... 999 min 8/12 mm
Permissible ambient temperature:	5 ... 40 °C
Power supply:	230 V / 50 Hz

Accessories  Accessories Tubing insulations for refrigerated and heating circulators Accessories  Accessories  Accessories  Accessories  Accessories  Accessories

Complete, for KISS E, CC-E and with baths as indicated. Incl. hose connectors NW 12.

Pump set for temperature control of external applications with pump connectors M16x1.

Powerful, compact and energy-efficient circulating chiller for cooling applications up to -30 °C. The on-demand and speed-controlled compressor, operated with natural refrigerant, achieves a cooling capacity of 800 W at a minimum energy consumption.
The speed-controlled PEEK pump allows an indirect continuous adjustment of maximum pressure and flow rate.

• Highly efficient speed-controlled cooling unit
• Natural refrigerant R290
• Speed-controlled PEEK pump
• High quality insulated 4 l bath reservoir
• Integrated filling funnel and drain valve enable safe and clean handling of the thermofluid
• Use of up to 2.5 l of thermofluid without refilling
• Digital level indicator
• Easy-to-clean stainless steel mesh filter
• RS 232 and USB interfaces
• Calibratable internal temperature sensor (3 point)

Scope of supply: Refrigerated circulator bath RC 2 GREEN basic, 2 x olive for DN 8 hoses, 2 x olive for DN 12 hoses, USB cable

Specifications
Cooling capacity (at 20 °C):	800 W
Working temperature:	-30 ... RT °C
Temperature stability DIN 12876:	±0.15 K
Filling volume:	1.5 ... 4 l
Pump power pressure side / suction side:	0.5 bar / 0.25 bar
Flow rate:	max. 21 l/min
Permissible ambient conditions:	5 ... 32 °C, 80 % r. h.
Dimensions (W x D x H):	220 x 525 x 475 mm
Power supply:	230 V, 50/60 Hz

Powerful, compact and energy-efficient circulating chiller for cooling applications up to -30 °C. The on-demand and speed-controlled compressor, operated with natural refrigerant, achieves a cooling capacity of 800 W at a minimum energy consumption.
The speed-controlled PEEK pump allows an indirect continuous adjustment of maximum pressure and flow rate.

• Highly efficient speed-controlled cooling unit
• Natural refrigerant R290
• Speed-controlled PEEK pump
• High quality insulated 4 l bath reservoir
• Integrated filling funnel and drain valve enable safe and clean handling of the thermofluid
• Use of up to 2.5 l of thermofluid without refilling
• Digital level indicator
• Easy-to-clean stainless steel mesh filter
• RS 232 and USB interfaces
• Calibratable internal temperature sensor (3 point)

With Wireless controller (WiCo) which shows all relevant process parameters at a glance and enables comfortable and safe operation of the device.

• LEMO socket for connecting an external PT 100 temperature sensor
• 10 freely programmable temperature ramps with 10 steps each
• Timer/Counter Function
• Calibrateable internal and external temperature sensor (3 point)

Scope of supply: Circulator bath RC 2 GREEN control, 2 x olive for DN 8 hoses, 2 x olive for DN 12 hoses, USB cable, Temperature sensor PT 100.30, WiCo Holder WH10, Charger for WiCo

Specifications
Cooling capacity (at 20 °C):	800 W
Working temperature:	-30 ... RT °C
Temperature stability DIN 12876:	±0.15 K
Filling volume:	1.5 ... 4 l
Pump power pressure side / suction side:	0.5 bar / 0.25 bar
Flow rate:	max. 21 l/min
Permissible ambient conditions:	5 ... 32 °C, 80 % r. h.
Dimensions (W x D x H):	220 x 525 x 475 mm
Power supply:	230 V, 50/60 Hz

Accessories Dry Block Heater