Cooling-Thermostats

Small, robust and cost effective with its stainless steel casing. The Minichiller is the smallest Unichiller in the world. Minichillers are available with air or water-cooled refrigeration systems, illuminated level indicator, overflow and drain on the front. The filling port is on the top of the unit. All models use natural refrigerants as standard. Minichillers have suction and pressure pumps and therefore have the advantage of have a high flow at low pressure. This is particularly interesting for all pressure sensitive applications (e.g. glass condensors).

Supply req.:

230 V 50/60 Hz

Exceptionally compact and powerful, Ministats have been the smallest cooling circulators in the world since 1976. Their compact form allows them to be placed in small spaces, e.g. in a laboratory extraction hood. Compliance with DIN 12876, class 3 allows them to be used unsupervised in continual operation. The maximum ambient temperature is 40 °C.
The powerful variable speed pressure/suction pump can thermoregulate objects in the bath or external applications. The maximum pressure can be controlled using an optional pressure sensor - VPC (Variable Pressure Control) - which protects delicate glassware. The small volume and high power of the Ministats means exceptionally rapid heating and cooling rates are achieved. Optional displacement inserts reduce the bath volume by approximately 50 % amplifying this effect and reducing moisture absorption in the thermal fluid. All models have Active Cooling Control for cooling power control at the maximum working temperature and an automatic cooling power regulation for energy saving operation and reduced heat dissipation into the lab.The bath opening is large enough to allow small objects to be thermoregulated within. All parts in contact with the thermal fluid are made of stainless steel or Polycarbonate.
Ministats have the Pilot ONE with Plug & Play technology (proven since 1980). In the event of service the controller can be simply swapped. Using a data cable the Ministat can be remotely controlled. The Pilot ONE has a state of the art microprocessor controller and a high precision temperature measurement system for exact and reproducible temperature control. The functionality and TFT-display are supported by Easy Control.
Typical applications for the smallest cooling circulator in the world are external closed systems e.g. photometer, refractometer and viscosimeter.

Pump pressure max.: Max. suction:	27 L/min / 0.7 bar 20 L/min / 0.4 bar
Temperature Stability to DIN 12876:	0.02 K

The K6 models are compact refrigeration bath circulators for temperatures from -25 to 200°C. These units are a combination of a refrigerated bath and immersion circulator, in combination with an integrated pump they are suitable for external open (with level control) and closed applications. The CC-E immersion circulator with its suction / pressure pump is suitable to externally open and closed applications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the KISS models.

Safety class:	FL, III
Heating capacity :	2 kW
Pressure pump
CC-K6 / CC-K6s:	27L/min / 0.7 bar
KISS-K6 / KISS-K6s:	14 L/min / 0,25 bar

Alternative Thermostatic baths with polycarbonate tanks Alternative Cooling circulators

This unique immersion circulator can thermoregulate a wide range of baths between -30°C and 150°C. This innovative construction allows the user ultimate flexibility. The circulation can be adjusted to suit the bath size using the stepless, variable speed suction/pressure pump. The pump can also be controlled with an optional pressure sensor for external applications.

Temperature stability to DIN 12876 :	0.02 K
Heating capacity :	1 kW
Pump pressure max.: Max. suction:	25 L/min / 0.7 bar 18.5 L/min / 0.4 bar

Alternative Thermostatic baths with polycarbonate tanks Alternative Cooling circulators

Combinations of immersion circulators and insulated refrigeration baths are low-cost solutions for direct thermoregulation within the temperature range -20/-30°C to +200°C. The refrigeration baths operate with natural refrigerants. A pump adapter (optional) can be fitted for thermoregulation of externally closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore suitable for external open thermoregulation applications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the KISS models.

Alternative Thermostatic baths with polycarbonate tanks Alternative Compatible Control Refrigeration Circulators K6

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

-Working Temperature: Ambient +10 °C to 135 °C

• Temperature Stability: ±0.07°C
• Pump: 1-speed
• Pump Pressure (max.): 1,8 psi (0,12 bar)
• External Circulation: Closed loop

The CC-805 is a low cost alternative for low temperature applications when low power is required.
Option: Natural refrigerant available on request

Pump data CC-805 to CC-906w:
Max. pressure: Max. suction:	25 L/min / 0.7 bar 18.5 L/min / 0.4 bar
Supply requirement: CC-805 / CC-902:	400 V 50 Hz 230 V 50 Hz
Temp. stability acc. to DIN 12876:	0.02 K

The new CF series offers compact refrigerated/heating circulators. With small overall dimensions the units can even be placed on a very small surface or within a complex installation. All models offer a heating capacity of 2kW and safety class 3 according to DIN12876-1. The maximum ambient temperature of 40 °C as well as ventilated air cooling allow the units to be positioned very closely together, with other units or directly under a fume hood. Furthermore all the models feature pump connections for external temperature applications and a bath opening for temperature control of small objects directly in the circulator bath. Wetted parts are made of high quality stainless steel or plastic. The instruments incorporate reliable Microprocessor electronics offering high temperature stability as well as warning and safety functions.

Economy line CF30, CF40

• Ergonomic design and easy operation
• Compact dimensions require minimal space
• Splash-proof keypad
• Large, bright LED temperature display
• Precise PID temperature control
• RS232 interface for PC connection
• Adjustable high temperature cut-out
• Pump connections for external temperature applications
• Bath opening for temperature control of small objects in the bath

HighTech line CF31, CF41
Generally as Economy line but additionally with:

• Bright VFD display and interactive LCD dialogue display
• Highly precise ICC cascade temperature control
• RS232/RS485 interface for PC connection
• Electronically adjustable pump output
• External Pt100 sensor connection
• Integrated programmer with 6x60 program steps
• Early warning system for low liquid level
• 3-point calibration
• TCF Temperature Control Features

Accessories  Accessories  Accessories

Refrigerated circulators are suitable for internal and external standard temperature applications as well as routine work in laboratories and industry.

• Bright, white, easy-to-read display
• Easy pump switching between internal and external circulation
• External pump connections (M16x1)
• USB connection
• Space-saving cooling coil design yields more usable space in the bath tank
• Stainless steel bath tank including bath lid and drain tap
• Removable ventilation grid
• Refrigeration unit without lateral ventilation openings
• 2 hose olives each suitable for hose inner diameter 8 and 12 mm included
• Class III (FL) acc. to DIN 12876-1

Specifications
Temperature stability:	± 0.03 °C
Heating capacity:	2 kW
Flow rate:	15 l/min
Pump pressure:	0.35 bar

Accessories  Accessories Tubing insulations for refrigerated and heating circulators Accessories  Accessories  Accessories  Accessories  Accessories

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

-Working Temperature: From -40° up to +200°C

• Temperature Stability: ±0.01°C
• Intuitive 3.75" (9.5 cm) display with touch-pad control
• 4 languages: French, German, Spanish, English
• Pump speed variable external temperature control capability
• Pump pressure max. 3.6 psi (0.25 bar)
• On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485 and external temperature probe
• Adjustable over- or under-temperature
• On-screen prompts
• Safety class III
• Single-point calibration capability

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

-Working Temperature: From -30° up to +170°C

• Temperature Stability: ±0.04°C
• Large 3.75" universal icon and English display
• Pressure Pump with two speeds
• Pump pressure max. 2.9 psi (0.20 bar)
• On-board connectivity: RS-232 serial output
• Adjustable over- or under-temperature
• Automatic performance optimization
• Safety class I
• Single-point calibration capability

Refrigerated circulators are suitable for temperature control for internal and external applications. Operation is simple and intuitive via the central rotary knob on the front of the unit.

• 3.5" TFT colour display with multilingual user interface
• Integrated programmer for 8 x 60 program steps
• Easy pump switching between internal and external circulation
• External pump connections (M16x1)
• Infinitely adjustable pressure pump
• USB connection
• Space-saving cooling coil design yields more usable space in the bath tank
• External Pt100 connection
• Stainless steel bath tank including bath lid and drain tap
• Removable ventilation grid
• 2 hose olives each suitable for hose inner diameter 8 and 12 mm included
• Class III (FL) acc. to DIN 12876-1

Temperature stability:	±0.01 °C
Heating capacity:	2 kW
Flow rate:	8 ... 27 l/min
Timer:	0 ... 99 h 59 min

Accessories  Accessories Tubing insulations for refrigerated and heating circulators Accessories  Accessories  Accessories  Accessories  Accessories  Accessories  Accessories

HUBER refrigerated bath circulators perform safe and repeatable heating and cooling tasks in the lab. The models are covering the range to -45°C with a selection of heating and cooling powers are available with air or water cooling (w). Natural refrigerants for environmentally friendly operation are available on request. A powerful variable speed pressure/suction pump allows the thermoregulation of objects directly in the bath or can be used to control external applications. The pump speed is stepless and when used in combination with an optional pressure sensor the maximum pressure can be controlled. VPC (Variable Pressure Control) ensures the best circulation and protects delicate glass apparatus from breakage caused by overpressure.
Small volume and high heating and cooling powers result in the shortest heating and cooling rates. Optional displacement inserts reduce the bath volume by half increasing this effect. Additionally the bath surface area is reduced, lowering moisture absorption. The optional calibration insert allows all HUBER refrigeration circulators to be used as calibration baths. The calibration insert ensures an even temperature distribution with a temperature stability of ±0.01K. All models have Active Cooling Control for cooling power control at the maximum working temperature and an automatic cooling power regulation for energy saving operation and reduced heat dissipation into the lab. Depending on the model carry handles or castors are fitted for easy transportation. The drain is located on the front of the unit to enable simple drainage of the bath. The cover plate is thermoregulated to avoid condensation. All models have the Pilot ONE with Plug & Play technology which can be simply swapped in the event of a service. The Pilot ONE can be used as a remote control (with data cable). The Pilot ONE is a high tech microprocessor based controller with a high precision measurement system for exact and reproducible results. The wide ranging functionality is supported by a large TFT display and simple operation. HUBER refrigeration circulators can be equipped with a Com.G@te to the NAMUR standard to enable integration in a process control system. Depending on the bath dimensions objects can be thermoregulated within the bath. Typical applications for these classics are the thermoregulation of externally closed systems, e.g. photometer, refractometer, viscosimeter, double-jacketed reactors and autoclaves. They are used in miniplants, kilo labs, for stock point measurement, for low temperature calibration, for petroleum tests and many more applications.

Option: Natural refrigerant available on request

Pump data
Max. pressure:	25 L/min / 0.7 bar
Max. suction:	18.5 L/min / 0.4 bar
Temp. stability acc. to DIN 12876:	0.02 K

Compact design and high cooling capacity at low temperatures.
Option: Natural refrigerant available on request

Heating capacity CC-505 / CC-505wl: CC-508 to CC-525w:	1.5 kW 3.0 kW
Pump data CC-505 to CC-525w Max. pressure: Max. suction:	25 L/min / 0.7 bar 18.5 L/min / 0.4 bar
Supply requirement CC-505 to CC-508w: CC-510 to CC-525w:	230 V / 50 Hz 400 V / 50 Hz
Temp. stability acc. to DIN 12876:	+/-0.02 K

Ultra-low refrigerated, circulators suitable for external heating and cooling tasks. Powerful circulating pump systems and high heating and cooling capacities guarantee short heat-up and cooling times. The inevitable dust accumulation that occurs in refrigeration systems is solved by means of an easily removed, vent grille. The units are equipped with handles or castors for easy manoeuvring. All models have a drain tap on the front, allowing the fluid to be emptied easily. Additionally the instruments are equipped with improved insulation to help avoid ice-formation, and have a visual liquid level display.

TopTech ME series

• VFD Comfort Display, resolution 0.01 °C
• keypad for setpoints, warning/safety values and menu functions
• PID3 cascade temperature control
• ATC3, 3-point calibration
• Pt100 external sensor connection for measurement and control
• PPC (Pump Pressure Control), electronically adjustable pump capacity
• Early warning system for low liquid level (DBGM 203 06 059.8)
• Adjustable high temperature cut-out, visible via display
• RS232 interface
• Integral programmer for 10 programme steps
• Active Cooling Control

HighTech HL, SL series - as TopTech ME series, but with additional

• LCD Dialogue Display, backlit for convenient interactive operation
• ICC (Intelligent Cascade Control), self-optimising temperature control
• TCF Temperature Control Features to optimise control behaviour
• RS232/RS485 interface
• Integral programmer for 6 x 60 programme steps
• Connections for solenoid valve and HSP booster pump

Accessories  Accessories  Accessories

Ultra-low refrigerated, circulators suitable for external heating and cooling tasks. Powerful circulating pump systems and high heating and cooling capacities guarantee short heat-up and cooling times. The inevitable dust accumulation that occurs in refrigeration systems is solved by means of an easily removed, vent grille. The units are equipped with handles or castors for an easy transportation. All models have a drain tap on the front allowing the fluid to be emptied easily. Additionally the instruments are equipped with improved insulation to help avoid ice-formation, and have a visual liquid level display.

TopTech ME series

• VFD Comfort Display, resolution 0.01°C
• Keypad for setpoints, warning/safety values and menu functions
• PID3, cascade temperature control
• ATC3, 3-point calibration
• Pt100 external sensor connection for measurement and control
• PPC (Pump Pressure Control), electronically adjustable pump capacity
• Early warning system for low liquid level
• Adjustable high temperature cut-out, visible via display
• RS232 interface
• Integral programmer for 10 programme steps
• Active Cooling Control

HighTech HL, SL series (as TopTech ME series, but with additional)

• LCD Dialogue Display, backlit for convenient interactive operation
• ICC (Intelligent Cascade Control), self-optimising temperature control
• TCF Temperature Control Features to optimise control behaviour
• RS232/RS485 interface
• Integral programmer for 6 x 60 programme steps
• Connections for solenoid valve and HSP booster pump

Accessories  Accessories  Accessories

Stable and reliable cooling for many common heat removal applications, including laser etching, AA furnaces, ICP, rotary evaporators, vacuum systems, reaction vessels, plasma etching, and condenser cooling. The chillers are available with turbine or positive displacement pump.

• A bright, full-color touchscreen display
• Cooling at ambient temperatures up to 30°C
• DynamicFilter™ self-cleaning filter system
• Liquid level sensor
• UV light system to prevent growth inhibitors
• User-adjustable temperature, pressure, and flow rate alarms
• External temperature tracking and communications capability (optionally)
• Cool Command™
• WhisperCool^® noise reduction system
• Self-diagnostics service and functionality system
• Front fill reservoir
• 4 Casters, 2 of them locking

Specifications:
Working temperature:	-10 ... 70 °C
Temperatur stability:	± 0.1 °C
Cooling capacity:	850 ... 2900 W
Connectivity:	RS232, status relay, dry contact
Power supply:	240 V, 50 Hz

Refrigerated circulators for precise, reliable temperature control of demanding external applications, e.g. in basic research, material testing and technical installations.

• High-resolution 7" TFT touch display with multilingual user interface
• External pump connections (M16x1)
• Integrated programmer for 8 x 60 program steps
• Infinitely adjustable, extremely powerful pressure and suction pump
• External Pt100 connection
• USB interface
• RS232 / RS485 interface
• Ethernet interface
• Modbus
• Connections for solenoid valve
• Medium-contacting parts made of stainless steel
• 2 hose olives each suitable for hose inner diameter 8 and 12 mm included
• Class III (FL) acc. to DIN 12876-1

Temperature stability:	± 0.01 °C
Flow rate:	16 ... 31 l/min
Pump pressure:	0.24 ... 0.92 bar
Suction pressure:	0.03 ... 0.4 bar
Heating capacity:	2000 W
Permissible ambient temperature:	5 ... 40 °C
Power supply:	200 ... 230 V / 50 ... 60 Hz

Accessories  Accessories Tubing insulations for refrigerated and heating circulators Accessories  Accessories  Accessories  Accessories  Accessories  Accessories  Accessories

Powerful recirculating chiller, designed for external cooling applications up to -30 °C. The energy-efficient chiller is operated with an eco-friendly refrigerant and reaches a high power density. This results in a comparatively small working space in the lab. Due to the excellent temperature stability they can handle even sophisticated applications. The isolated, high-quality bath has an integrated hopper and drain valve, ensuring safe and clean handling of the thermofluid.

• Speed-controlled refrigeration system (PEEK)
• Speed-controlled pump (PEEK)
• Natural thermofluid R290
• Extended operating temperature range until 80°C
• Digital level indicator
• Interfaces: RS 232 and USB

RC 5 control additionally:

• Remote control via Wireless Controller (WiCo)
• Simplified and automated processes through 10 freely programmable temperature ramps with 10 steps each
• Timer/Counter
• Degassing function
• Connection of magnetic valves possible (Mulit IO)
• Alarm contact (Multi IO)
• Connector for standby contact input (Multi IO)
• Connection for external PT100 temperature sensor (included in delivery)

Specifications	RC 5 basic // RC 5 control
Cooling power (at 20 °C):	1400 W
Working temperature range:	-30 ... RT
Temperature display:	LED // TFT
Temperature consistency in accordance with DIN 12876:	0.2 K // 0.1 K
Filling volume:	5 ... 7 l
Pump power pressure side / suction side:	0.61 bar / 0.45 bar
Max. flow rate:	31 l/min
Permissible ambient temperature:	5 ... 32 °C
Permissible relative humidity:	80 %
Dimensions (W x D x H):	310 x 490 x 546 mm
Weight:	37.5 kg
Power supply:	230 V, 50/60 Hz
IP code acc. to DIN EN 60529:	IP21

Refrigerated circulators with enhanced, flexible pump performance and a working temperature range up to 200 °C. Temperature control is possible either in the internal bath or in a connected external application.

• Bright, white, easy-to-read display
• Easy pump switching between internal and external circulation
• External pump connections (M16x1)
• Infinitely adjustable pressure pump
• USB connection
• RS232 interface
• Timer adjustable up to 999 minutes
• Space-saving cooling coil design yields more usable space in the bath tank
• Stainless steel bath tank including bath lid and drain tap
• Removable ventilation grid
• Refrigeration unit without lateral ventilation openings
• Unique early warning system for low liquid level
• Class III (FL) acc. to DIN 12876-1

Scope of supply: Refrigerated circulator, mains power cable, connection box, bath cover, connecting cable, refrigerator, hose olives 8 and 12 mm
-With refrigerant R449A

Specifications
Setting accuracy:	0.01 °C
Temperature stability:	±0.03 °C
Flow rate: Pump pressure:	8 ... 27 l/min 0.1 ... 0.7 bar
Heating capacity:	2 kW
Timer: Hose connector inner width:	0 ... 999 min 8/12 mm
Permissible ambient temperature:	5 ... 40 °C
Power supply:	230 V / 50 Hz

Accessories Tubing insulations for refrigerated and heating circulators Accessories  Accessories  Accessories  Accessories  Accessories Water bath preservative liquid Aqua Stabil Accessories Tempering Liquids Alternative  Alternative  Alternative  Alternative  Alternative  Alternative  Alternative  Alternative  Alternative  Alternative