Ovens, Furnaces

Filter

 Ashing/Burn off furnaces LV 3/11 - LVT 15/11

Nabertherm

The models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.

  • Tmax 1100°C
  • Heating from two sides
  • Ceramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replace
  • Insulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2
  • Housing made of sheets of textured stainless steel
  • Dual shell housing for low external temperatures and stability
  • Optional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operator
  • Solid state relays provide for low noise operation
  • Air exchange of more than 6 times per minute
  • Good temperature uniformity due to preheating of incoming air
  • 220-240 V 1/N/PE 50/60 Hz connector as standard
...

 Chamber furnaces

Nabertherm

The chamber furnaces are suitable for Annealing, Hardening and Brazing. The furnaces can be extended with a variety of accessories, like annealing boxes for operation under protective gas, roller guides, or a cooling station with a quench tank. Even high-performance applications like the annealing of titanium can be implemented without the use of expensive and complicated annealing systems....

 High-temperature chamber furnaces with SiC rod heating LHTC/LHTCT 03/14 - 08/16 series

Nabertherm

These powerful laboratory muffle furnaces are available for temperatures up to 1400 °C, 1500 °C, 1550 °C or 1600 °C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these furnaces the all-rounders in the laboratory. Heating times of 40 minutes to 1400 °C can be achieved, depending on the furnace...

 Muffle furnaces series L, max. 1100 °C, with flap door

Nabertherm

For daily laboratory use. Models with flap door or lift door available, for temperatures from 1100 °C to 1400 °C. Equipped with programmable controllers B 510 (with touch panel, 5 programmes with 4 segments each), or C 550 (with touch panel, 10 programmes with 20 segments each), L 1/12 with controller R 7 (continuous operation)....

 Muffle furnaces series L, max. 1200 °C, with flap door

Nabertherm

For daily laboratory use. Models with flap door or lift door available, for temperatures from 1100 °C to 1400 °C. Equipped with programmable controllers B 510 (with touch panel, 5 programmes with 4 segments each), or C 550 (with touch panel, 10 programmes with 20 segments each), L 1/12 with controller R 7 (continuous operation)....

 Muffle Furnaces Series LE 1/11 - LE 24/11 up to 1100 °C

Nabertherm

Compact muffle furnaces with dual shell furnace housing of rust-free stainless steel and heating elements encased in quartz glass tubes.

  • Tmax 1100 °C, working temperature 1050 °C
  • Heating from two sides from heating elements in quartz glass tubes
  • Maintenance-friendly replacement of heating elements and insulation
  • Insulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2
  • Housing made of sheets of textured stainless steel
  • Dual shell housing for low external temperatures and high stability
  • Flap door which can also be used as a work platform
  • Exhaust air outlet in rear wall
  • Compact dimensions and light weight
  • Controller mounted under the door to save space
  • Equipped with the basic controller R 7 with one free storeable temperature, which is dwelled until the controller is switch off
  • Standard power supply 230 V, 1/N/PE, 50/60 Hz
...

 Muffle furnaces series LT, max. 1100 °C, with lift door

Nabertherm

For daily laboratory use. Models with flap door or lift door available, for temperatures from 1100 °C to 1400 °C. Equipped with programmable controllers B 510 (with touch panel, 5 programmes with 4 segments each), or C 550 (with touch panel, 10 programmes with 20 segments each), L 1/12 with controller R 7 (continuous operation)....

 Muffle furnaces series LT, max. 1200 °C, with lift door

Nabertherm

For daily laboratory use. Models with flap door or lift door available, for temperatures from 1100 °C to 1400 °C. Equipped with programmable controllers B 510 (with touch panel, 5 programmes with 4 segments each), or C 550 (with touch panel, 10 programmes with 20 segments each), L 1/12 with controller R 7 (continuous operation)....

 Accessoires for Muffle furnaces, M110-series

Thermo

...

 Rapid incinerator

Gestigkeit

For individual and series incineration of solids and liquids. Upper platform with 8 openings of 34mm diameter, for porcelain crucibles up to 50mm diameter. Upper platform and housing made of stainless steel. With 120 minute timer with audible signal after timed period and separate continuous operation switch. A safety switch switches the mains supply off / on automatically on opening / closing the incinerator chamber. With 1.5 metre cable and earthed plug....

Add to shopping cart