Heating baths

The heating bath HB 1500 is developed for varied tasks. As bath filling water, oils and sand is used. Different sizes are deliverable! The device has an integrated temperature controller with microprocessor. It is freely programmable and has also self optimization function and rampfunction!

• Microprocessor controller with 4-digits 7-segment display, 10 mm high, green,
• With selfoptimization and rampfunction
• Measurement and control range +20,0 to +250,0°C
• On-Off switch is light up green
• Setting of heat power from 1 to 99%
• Irreversible rapid shut-down when reaching the security temperature

Heating bath HB 1500-S
Equipment such as HB 1500, also with safety on separate microprocessor controller and an internal temperature sensor. Exceeding the safety temperature, the heating is switched off completely. The over-temperature shutdown >10K + reference deleted.

Compact and ergonomic heating safety bath for all tempering media.

• Ergonomic handles
• Key button to lock heating bath temperature
• Clear, black-and-white display
• Permanent set-point/actual temperature display
• 3 different safety operating modes
• USB interface

Specifications
Heating output:	1350 W
Temperature range:	ambient ... 180 °C
Setting accuracy:	±1 K
Offset:	±1 K
Material:	Stainless steel 1.4404
Useful volume:	4 l
Dimensions, internal (diam. x H):	225 x 130 mm
Dimensions, external (W x D x H):	330 x 325 x 190 mm
Weight:	3.9 kg
Power supply:	200 ...240 / 100 ... 120 V, 50/60 Hz
IP code acc. to DIN EN 60529:	IP 21

Compact and ergonomic heating safety bath.

• Ergonomic handles
• Clear, black-and-white display
• Alternating set-point/actual temperature display
• USB interface

Specifications
Heating output:	1400 W
Temperature range:	ambient ... 99 °C
Setting accuracy:	±1 K
Offset:	±2 K
Material:	Stainless steel 1.4404
Useful volume:	4 l
Dimensions, internal (diam. x H):	225 x 130 mm
Dimensions, external (W x D x H):	330 x 325 x 190 mm
Weight:	3.9 kg
Power supply:	200 ...240 / 100 ... 120 V, 50/60 Hz
IP code acc. to DIN EN 60529:	IP 21

Alternative Heating Bath HB Digital

Set of rings H 240: To cover the heating bath.
Intermediate base H 159: Allows insertion of vessels into the bath, without affecting the stirrer motion.

The insulated stainless steel baths are suitable for use up to 200°C. All models have a bridge-mounted immersion circulator. With a pump adapter, this combination can also be used with externally closed and externally open (with option level control) applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications.

Stability to DIN 12876:
CC models:	0.02K
KISS models:	0.05K
Max. temp.:	200°C
Safety class:	FL, III

Accessories Immersion circulators KISS E and CC-E Accessories Function upgrade for Huber circulators

For continuous operation. Electrical sand baths with thermostatic temperature control and separate power controller for performance adjustment to the heating requirements. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. Asbestos free. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50mm. Stainless steel controller housing, with painted central section. Height-adjustable feet. Connection cable approximately 1.7m. With earthed plug for 230V supplies up to 3300W. A 400V 3-phase model is also available.

Alternative Sandbaths with Performance Control

Made of glass ceramic which offers excellent chemical resistance.

• fixed safety circuit of 550°C
• Hot Top indicator: Hot surface warning to prevent burns
• exact temperature setting via digital display (LED)
• digital error code display
• raised control panel for protection against spilt liquids

C-MAG HP 7, C-MAG HP 10 additionally:
adapter according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5, enables precise temperature control

Specifications Heating function
Temperature display:	digital
Heat output C-MAG HP 4: C-MAG HP 7: C-MAG HP 10:	250W 1000W 1500W
Heating rate (1 litre H2O) C-MAG HP 4: C-MAG HP 7 / HP 10:	2.5K/min 5K/min
Temperature range:	50 to 500°C
Setting accuracy:	± 10K
Safety circuit fixed:	550°C
Control accuracy with sensor C-MAG HP 4: C-MAG HP 7 / HP 10:	- ETS-D5 / ± 0.5 K
Heating plate Material:	glass ceramic
Dimensions C-MAG HP 4: C-MAG HP 7: C-MAG HP 10:	100 x 100mm 180 x 180mm 260 x 260mm
Tested to DIN EN IEC 61010-1.

This precise digital bath is specifically designed to be used with the Stuart rotary evaporators to give maximum efficiency for the smallest footprint. The clear LED digital display shows the actual bath temperature or the set temperature. Outer case is made from chemically resistant polypropylene.

• Digital temperature display, display resolution 1 °C, temperature control ±1.5 °C (water), ±3 °C (oil)
• Corrosion resistant bowl
• Easy to clean
• Cool touch outer case

Please note plastic coated glassware is limited to 80°C and therefore unsuitable for use with the oil bath.

Annealed quality, 0.1 to 0.5 mm grain size.

For continuous operation. Electrical sand baths with thermostatic temperature control and separate power controller for performance adjustment to the heating requirements. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. Asbestos free. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50 mm. Stainless steel controller housing, with painted central section. Height-adjustable feet. Connection cable approximately 1.7 m. With earthed plug for 230 V supplies up to 3300 W. A 400V 3-phase model is also available.

Alternative Sand Baths with Performance Control and Thermostatic Controller

With their stable, low-wear mechanics, the Hydro steam baths ensure particularly quiet operation and reliable continuous operation. For gentle evaporation work from columns, Erlenmeyer flasks, beakers, with 1, 4, 6 or 8 openings. With their precise temperature distribution, they are designed for the needs of biological, medical or biochemical laboratories.

• With »GFL Technology« for the highest quality, reliability and durability
• Water level regulator as standard
• Removable perforated lid made of heat-resistant plastic
• H 11 V and H 19 V completely made of stainless steel, suitable for the evaporation of aggressive media

Accessories