CO2-Incubators

Comfort module:
two gas connections with quick release connectors, automatic switch-over gas cylinders (impossible in combination with O₂module)
Hygiene module:
electropolished interior, seamlessly welded by laser
Communication module:
USB interface, "Celsius" standard software for the control and logging of temperature, CO₂; O₂ (with O₂ module) and relative humidity; internal log memory 1024 kB as ring memory for all setpoint values, actual values, errors, settings with real time and date: logging approx. 3 months at 1 min. logging interval; parallel printer interface for all PCL3-compatible printers
CO₂ module:
extended CO₂ range from 0 to 20%
Premium module:
includes Comfort, Hygiene, Communication and CO₂module (impossible in combination with O₂ module)
O₂module:
control of oxygen concentration by N2 inlet, adjustment range 1% bis 20% O₂, setting accuracy 0,1%

Combination O₂ module with Comfort and Premium module impossible

BBD 6220 provides stable growth conditions and a high degree of security and protection against contamination. Typical applications are for IVF or pathogenic work. Range: ambient + 5°C to 50°C, humidity greater than 95% R.H. and CO₂ concentrations between 0 and 20% Vol are reliably achieved via a microprocessor controlled measuring and control system. An automatic disinfection routine at 180°C, which safely eliminates bacteria, fungi and spores, decontaminates the entire interior space including the sensors and fittings. The humidity water reservoir is located outside the chamber. The water is sterilised before it is used for humidification. The stainless steel chamber is crevice-free with rounded corners for easy cleaning. Includes "Heraeus CO₂ Autozero System" overtemperature protection with separate probe and RS232 interface.

The CellCulture^® CO₂ incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.

• Fast and uniform temperature, CO₂ and O₂ control (O₂ suppressed models)
• HEPA filtration system with internal blower (some models)
• Capacitive humidity sensor
• IR CO₂-sensor with automatic auto zero
• Quick recovery time for temperature, CO₂ and humidity after door opening
• Stainless steel 1.4301 (AISI 304) or copper interior
• 90 °C moist heat decon system (models with air jacket)
• Easy to clean due to removable lids and inner door
• Serial RS485 communication port
• Low maintenance
• Stackable

The CellCulture^® CO₂ incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.

• Fast and uniform temperature, CO₂ and O₂ control (O₂ suppressed models)
• HEPA filtration system with internal blower (some models)
• Capacitive humidity sensor
• IR CO₂-sensor with automatic auto zero
• Quick recovery time for temperature, CO₂ and humidity after door opening
• Stainless steel 1.4301 (AISI 304) or copper interior
• 90 °C moist heat decon system (models with air jacket)
• Easy to clean due to removable lids and inner door
• Serial RS485 communication port
• Low maintenance
• Stackable

The CO₂ incubator ICOmed is the perfect solution: Thanks to the battery-buffered ControlCOCKPIT, the operating display, logging and CO₂control remain fully functional even when there is a power failure. All parameters are logged in accordance with the FDA and, when individually adjusted ranges for CO₂, O₂, temperature and humidity are exceeded, notifications can be sent to a mobile phone in addition to an alarm. With its rounded corners, the interior is easy to clean and can be sterilised for 60 minutes at 180 °C (including all sensors). The active humidity control offers optimal protection for cell and tissue cultures. It minimizes evaporation in the interior and ensures short recovery times. Every Memmert CO₂ incubator ICOmed is a medical device of class IIa according to MDD 93/42/EEC until 26 May 2024 according to the transitional provisions by the (EU) 2017/745 article 120 (2).

• fully insulated stainless steel door and heated inner glass door

The Thermo Scientific Midi 40 CO₂ incubator is designed specifically for cell culture scientists who require a compact culturing workspace to handle small workloads, perform personal use applications, or simply address limited space environments. With its 1.4 cu ft (40L) capacity, the Midi 40 adds a new dimension to the Thermo Scientific portfolio of leading CO₂ incubation solutions. It delivers the performance and capabilities of full-sized incubators in a space-saving footprint, ideal for those who wish to avoid shared-use environments that can present potential contamination risk through unnecessary sample handling and repeated door openings. Easy to operate and economical to own, the fully featured Midi 40 offers remarkable value in a small footprint.

The Midi 40 includes:

• Advanced IntrLogic™ II microprocessor: bright digital display and intuitive touchpad for simplified entry of temperature, CO₂ and alarm data, with keyed setpoint switch to prevent unauthorised changes to your operating parameters.
• Stainless steel culture chamber: seamless, non-corrosive and exceptionally easy to clean. The Midi 40 is provided with four removable shelves.
• Highly efficient direct heating design: provides even heat distribution to all sides of the chamber, for accurate control with uniformity of +/- 0.1°C.
• Precise and reliable CO₂ control: featuring accurate thermal conductivity sensor located directly in the chamber, ensuring responsive control and long service life.
• Removable water reservoir: generates relative humidity values up to 95% with rapid recovery rates that promote optimal cell growth.
• Heated inner glass door: provides sample security while preventing unwanted condensation.
• Convenient data communication: RS-485 signal output is standard, in addition to audible and visual alarm functions to ensure proper operations.

The Galaxy 48 R CO2 incubator is a medium-sized incubator with a capacity of 48 litres. It is specially designed for small laboratories and applications requiring a higher degree of isolation. The 48 R features a large backlit display with on-screen display of a help menu, control and data logging of temperature, CO2, door openings, alarms and optional O2 levels and humidity monitoring.

Features & Benefits:

• 48 litres (1.7 ft3) offer medium capacity in a small footprint
• options: High temperature decontamination (4 hours at 120 °C), O2 control (e.g. for hypoxic experiments), also available with split inner door
• Fanless design offers more usable space
• direct heating of all six walls ensures even and gentle
• Incubation conditions
• deep-drawn, easy-to-clean stainless steel chamber without seams or welds
• Low gas consumption due to the separately insulated inner door
• Integrated alarm relay

• Battery-buffered ControlCOCKPIT - Uninterrupted supply for the entire display unit (ControlCOCKPIT) and therefore complete documentation of all parameters even when there is a power failure. The CO₂ parameter is continuously regulated

• Two gas connections with quick release connectors for automatic switch-over of gas cylinders

• Active microprocessor control for humidifying and dehumidifying (40 - 97 % rh), incl. digital indication and auto-diagnostic system ensures even more rapid reaching of set humidity and very short recovery times while avoiding condensate formation. Humidity supply with distilled water (from an external tank) by a self-priming pump; integral bacteria block by generating hotsteam, dehumidifying via sterile filter

• Control of oxygen concentration by N₂ inlet; adjustment range 1 % up to 20 % O₂;

• Peltier cooling unit, enables a working temperature of 37 °C even at higher ambient temperatures of up to 35 °C

• Further options and accessories, f. ex. special works calibration certificates, subframes, pressure reducing valves on request.

A CO2 incubator with a particularly uniform atmosphere, fast recovery and effective contamination protection. The C170 is easy to clean and simple to use and offers a high usable volume in relation to the footprint. The CellXpert C170 is the basic version of the C170i.

Features & Benefits:

• Verification of temperature homogeneity at 27 points (based on DIN-12880).

• CO2 recovery times < 5 min without exceeding setpoint due to microprocessor control
• Vibration and turbulence protection due to fanless design
• High-temperature decontamination at 140 °C
• Easy cleaning thanks to seamless deep-drawn chamber, quick removal
• Fanless construction
• No Hepa filters inside that could contaminate the chamber after HTD
• Up to 25% more usable space thanks to fanless design
• Accelerated workflow for handling and cleaning