Tubing, plastic

Food safe, non talc-coated, according to BfR XV (Silicone) and FDA 177.2600. Durometer 60 ± 5 Shore A to DIN 53505. Supplied per meter.

Black, thermoplastic elastomer, Shore A 61. Suitable for use as tubing for peristaltic pumps. High endurance. Resistant to many aggressive chemicals.

• Temperature range -60 to 135 °C
• Superior weathering
• Abrasion resistant
• Low gas permeability versus rubber tubing
• Ozone (300 pphm) and UV light resistant

Synthetic fluoroelastomer. Chemically resistant to hydrocarbons (aromatic and aliphatic), oils, strong acids, oxidizing agents and chlorous solvents. Excellent resistance to abrasion and flexing. Good ozone and radiation protection. Impermeable to gas and steam. Shore A, Density 1.9. Temperature range -20 °C to 200 °C (up to 300°C for short periods). Elongation at tear >250%. Suitable for transporting corrosive liquids.

Versilic^® 60 shore tubing is biologically inert and does not inhibit cell culture. It stays flexible down to -50 °C and maintains its chemical, mechanical and electrical performance up to 200 °C. Versilic^® meets the European Pharmacopoeia requirements for silicone elastomer for closures and tubing, USP Class VI biological tests and ISO 10993 biocompatibility (systemic toxicity, irritation, sensitization, citotoxicity, hemocompatibility and Ames test).

Transparent. Shore A 55. Universal laboratory tubing with very good gripping properties on glass or plastic fittings. Very low gas permeability level similar to rubber. Resistant to most laboratory chemicals. Suitable for peristaltic pumps and for food and beverage dispensing. Meets FDA and USP class VI.

• Temperature range -50 to 74°C
• Smooth inner surface
• Contains no BPA or phthalates

Transparent. PVC with terylene mesh reinforcement. Certificated by German TÜV with due regard to regulatory of DIN EN ISO 5774:2008. Proofed by BGVO directive 2002/72/EC bis 2008/39/EC for food contact. Durometer 77 Shore A. Supplied per meter.

Highly chemical resistant and withstands temperatures from -200°C to 250°C.

For non-pressure applications in chemical industry, beverage industry and laboratory technology.

• Hardness 80 shore A
• High resistance to chemicals
• Good acid and alkali resistance
• Temperature resistance -10°C to 60°C
• Phthalate-free
• Food safe

Transparent, heat resistant up to 60°C. Hardness 80 Shore A. Supplied per meter.

Silicone rubber (VMQ), transparent, hardness 60 Shore A, food safe, temperature-resistant from -60 to 200 °C (short term up to 260 °C), suitable for peristaltic pumps. BFR XV, FDA CFR 21 õ 177.2600, EP-Europ. Pharmacopoeia / DAB, biocompatibility: Cytotoxicity (USP Class 1-6), Hemolysis, Pyrogenicity, Sensitization, Dermatological Irritation, Implantation (90 days) according to ISO 10993-1. Supplied per meter.

Gives a visual indication of liquid or gas flow in tubing. Operates in both directions and at any angle. Can accomodate flow rates down to approx. 150 ml/min Length incl. nozzle 88 mm. For tubing from 6mm to 11 mm diameter. Maximum pressure: 2 bar. Food Safe.
Choice of models:

• LiquiMobil made of SAN up to 30 °C working temperature
• CheMobil made of PMP up to 60 °C working temperature, autoclavable good, chemically resistance

• Fluoroelastomer Rubber (FPM), black
• Temperature range -10 to over 200 °C
• Good resistance to ozone and weathering, as well as benzine and mineral oil
• Durometer 75 Shore A

Silicone rubber (VMQ), transparent, hardness 60 Shore A, food grade, temperature-resistant from -60 to +200 °C (short term up to +260 °C), suitable for peristaltic pumps. BFR XV, FDA CFR 21 õ 177.2600, EP-Europ. Pharmacopoeia / DAB, biocompatibility: Cytotoxicity (USP Class 1-6), Hemolysis, Pyrogenicity, Sensitization, Dermatological Irritation, Implantation (90 days) according to ISO 10993-1. Supplied per meter.

PFA fluorocarbon resin. Highly chemical resistant and temperature resistant up to 260°C.

With 2 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380 mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.

Transparent. Durometer 45 Shore D. Resistant to acids, bases, alcohols, and salt solutions.
Temperature restistant up to 80° C. Supplied per meter.

130 mm high quality steel tweezers with strong plastic replaceable tips. Tips made of plastic type CF (carbon fibre), handles made of anti-magnetic anti-acid stainless steel. For laboratory applications in moderately aggressive chemical environments.

Tips made of PA66/CF30 polyamide 66 reinforced with 30 % carbon fibre. Very high rigidity, excellent tensile and flexural strength, fatigue resistance. Excellent wear and abrasion resistance. Not resistant to strong acids, alkalis and hot water or steam. Very low coefficient of linear thermal expansion.
Forceps made of Stainless Steel type SA, from 16.5 to 18.5 % chromium and nickel and molybdenum as additional alloying elements. Non-magnetizable.

Portable, pocket-sized cutter cuts flexible tubing from 1.6 to 19 mm O.D. The jaw is lightly spring-loaded and will remain closed for safety when not in use. A replaceable, hardened steel blade makes clean, straight cuts.

Silicone-platinum tubing, Shore A 50. For sterile filling systems, chemistry and blood analyzers and liquid chromatography. Biocompatibility for sensitive applications. To FDA and USP Class VI, in accordance with ISO 10993.

• Temperature range -81 to 200°C
• Smooth inner surface
• High flexibility
• Ozone and UV resistant

Made in a compound of pure PTFE and fine carbon dust.
Main characteristics: good conducting capacity, high chemical resistance (except of substances with high reactivity to carbon), load resistance 10⁶ ohm/m, black.
Temperature: -200 °C to 250 °C

Flanged PTFE tubing with black tube end fittings UNF ¼" 28 G made of PP and washers made of PA. The tubing is ready for use. Temperature resistant from 0 to +100 °C, pressure resistant up to 30 bar, universal chemical resistance.

Biologically inert and ultra-pure, Biotech CE is available in the largest selection of concise MWCOs (0.1 to 1000 kD) and sizes to provide better molecular separation for desalting, isolating ionic species and macromolecular purifications. Moderate chemical compatibility tolerates weak or dilute acids or bases and mild alcohols with only a slight change to the MWCO. Not for use with organic solvents. Use with pH 2 to 9 and temperature 4 to 37 °C.

Corrugated tubing with circular corrugations around the longitudinal axis and cylindrical tubing ends with a length of 40mm which can for example be connected directly to fittings, stopcocks or hose connectors. Together with BOLA Laboratory Screw Joints, the connection is tight and suitable for vacuum.

• Highly flexible
• Tight bending radius only causes little cross-section reduction
• Non-porous
• Transparent
• Ideal for connections under vibrations
• Usable with a small bending radius
• For compensation of thermal expansions
• For easy handling of liquids

Autoclavable, transparent and non-toxic, non ageing and non oxidising. Packed in PE bags. The tubing is marked every metre. Good resistance against strong acids and akalis, fair resistance against organic solvents. Durometer 77 Shore A.

Assemblies and Tubings
Hamilton Luer Lock tubing assemblies are ideal for quickly connecting and disconnecting components with male luer locks suitable for micro fluidic applications. Hamilton offers a wide varitey of chemically inert tubing assemblies for specific fluid applications. Different gauges, lengths, hub assemblies, and fittings are available according to standard or customer specification. To build your own assemblies, Hamilton offers fitting kits and tubings. Hamilton fittings and adapters are installed finger tight and provide leak tight seal rated to 0.6 MPa.

Hub Tubing Assemblies with 2 Hubs and further tubing lengths available on request.
The tubing is 300 mm in length but can be trimmed shorter to a desired length.

Assemblies and Tubings
Hamilton Luer Lock tubing assemblies are ideal for quickly connecting and disconnecting components with male luer locks suitable for micro fluidic applications. Hamilton offers a wide varitey of chemically inert tubing assemblies for specific fluid applications. Different gauges, lengths, hub assemblies, and fittings are available according to standard or customer specification. To build your own assemblies, Hamilton offers fitting kits and tubings. Hamilton fittings and adapters are installed finger tight and provide leak tight seal rated to 0.6 MPa.

Hub Tubing Assemblies with 2 Hubs and further tubing lengths available on request.
The tubing is 500 mm in length but can be trimmed shorter to a desired length. Further tubing lengths available on request.

With 3 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.

Suitable for all rubber tubings, even PTFE and fabric-reinforced tubings. Interchangeable blade.

Assemblies and Tubings
Hamilton Luer Lock tubing assemblies are ideal for quickly connecting and disconnecting components with male luer locks suitable for micro fluidic applications. Hamilton offers a wide varitey of chemically inert tubing assemblies for specific fluid applications. Different gauges, lengths, hub assemblies, and fittings are available according to standard or customer specification. To build your own assemblies, Hamilton offers fitting kits and tubings. Hamilton fittings and adapters are installed finger tight and provide leak tight seal rated to 0.6 MPa.

Hub Tubing Assemblies with 2 Hubs and further tubing lengths available on request.
Further tubing lengths available on request.

Silicone tube, platinum-cured, reinforced material, Shore A 70. Suitable for high pressures. For sterile filling systems, water purification systems, cleaning and sterilization. Meets FDA and USP Class VI and ISO 10993.

• Temperature range -80°C to 160°C
• Smooth inner surface
• High flexibility
• Ozone and UV resistant

Clear, transparent. Chemically resistant to aggressive cleaning fluids and sanitizers. Suitable for many foods and beverages. Contains no BPA or phthalates.

Transparent. Shore A 67 (casing). Resistant to the most aggresive liquids (acids, alkali solutions, solvents of all types) and gases. The only Tygon tubing which comprises of two layers: an FEP lining internally and transparent Tygon tubing externally. This combination combines the flexibility (can be bent to narrow angles) and transparency of Tygon R 3603 with the chemical resistance of fluorine polymers (FEP). Totally odourless and tasteless. Meets FDA and USP Class Vl specifications.

• Temperature range -40 to 77°C
• Contains no BPA or phthalates

Polytetrafluorethylene (PTFE), white, without pressure heat resistant to 270 °C.

Transparent, flexible, Shore A 56. Temperature range -54 to 74°C. Tygon tubing with the longest "Flex-Life" (lifespan) when used in peristatic pumps. To FDA / USP Class VI. ISO 10993, according to REACH without phthalates.Suitable for food, drinks or pharmaceutical applications. Resists ageing and non-toxic. Resistant to many chemicals.

Transparent. Density: 0.29. Shore: 72. Temperature from -78°C to 52°C.
Resistant to highly agreesive chemicals. Platicizer-free, minimises risk of fluid contamination. Exceptionally smooth inner surface inhibits particulate builtup. Low absorption maintains fluid integrity. FDA approved for food contact and NSF 51. REACH compliant.

Natural Rubber, light, transparent, sterilizable to 120 °C. Supplied in 10 m coil.

Transparent and flexible. Autoclavable. Shore A 56. Suitable for peristaltic pumps, for condensers, incubators, desiccators, gas lines and drain lines and for food and beverage dispensing. Resistant to most laboratory chemicals. Meets FDA and USP class VI.

• Temperature range -46 °C to 74 °C
• Vacuum range 760 mm at 23 °C to 685 mm at 60 °C
• Good tensile and tear strength
• Smooth inner surface
• Contains no BPA or phthalates

Thermoplastic elastomer, beige, Shore A 64. Can be used at temperatures from -51 to 135 °C. Can be autoclaved repeatedly, and non toxic. To USP Class VI. Fulfills FDA and NSF criteria. Suitable for laboratory, medical and research work, e.g. cell culture application. Significantly less gas leakage than silicone. Long working lifespan when used in peristaltic pumps. Ozone and UV resistant. Very good chemical resistance.

Long flex life, high-precision tubing with 2 colour-coded bridges. Broad resistance to acids and alkalis. With precison bore to allow accurate dispensing and flowrates. Colour-coding as indicated.

Tubing assemblies FEP. Dispense tubing has tapered end.

C-Flex^® is a patented thermoplastic elastomer tubing specifically designed to meet the critical demands of pharmaceutical and biopharmaceutical applications for fluid processing.

C-Flex^® tubing for Biopharma Manufacturing is specifically designed for aseptic welding connections and sealing disconnection. C-Flex^® is suitable for sterilization by gamma irradiation and autoclave. It is moldable, bondable and formable, ideal for single-use assemblies, such as tubing with bags manifolds.

Features/Benefits:

• Sealable and weldable either pre- or post- sterilization
• Sterilizable by gamma irradiation and autoclave
• Complies with USP Class VI and ISO standards
• Full Validation Package available for all C-Flex commercial formulations.
• Moldable, bondable and formable for single use assemblies and overmolds
• Pyrogen-free, non-cytotoxic, non-hemolytic
• Remains flexible from -45°C to 135°C
• Significantly less permeable than silicone
• Smooth inner bore for superior fluid flow
• Safe disposable through incineration
• All formulas are Animal-Derived Component Free (ADCF)

• Aseptic sealing disconnections
• Aseptic welding connections
• Sterile dosing and filling
• Buffer and media preparation
• Cell culture operations
• Purification operations
• Diagnostics products
• Biopharma manufacturing
• Single-use fluid transfer sets

C-Flex^® is a patented thermoplastic elastomer tubing specifically designed to meet the critical demands of pharmaceutical and biopharmaceutical applications for fluid processing.

C-Flex^® tubing for Biopharma Manufacturing is specifically designed for aseptic welding connections and sealing disconnection. C-Flex^® is suitable for sterilization by gamma irradiation and autoclave. It is moldable, bondable and formable, ideal for single-use assemblies, such as tubing with bags manifolds.

Features/Benefits:

• Sealable and weldable either pre- or post- sterilization
• Sterilizable by gamma irradiation and autoclave
• Complies with USP Class VI and ISO standards
• Full Validation Package available for all C-Flex commercial formulations.
• Moldable, bondable and formable for single use assemblies and overmolds
• Pyrogen-free, non-cytotoxic, non-hemolytic
• Remains flexible from -45°C to 135°C
• Significantly less permeable than silicone
• Smooth inner bore for superior fluid flow
• Safe disposable through incineration
• All formulas are Animal-Derived Component Free (ADCF)

• Aseptic sealing disconnections
• Aseptic welding connections
• Sterile dosing and filling
• Buffer and media preparation
• Cell culture operations
• Purification operations
• Diagnostics products
• Biopharma manufacturing
• Single-use fluid transfer sets

C-Flex^® is a patented thermoplastic elastomer tubing specifically designed to meet the critical demands of pharmaceutical and biopharmaceutical applications for fluid processing.

C-Flex^® tubing for Biopharma Manufacturing is specifically designed for aseptic welding connections and sealing disconnection. C-Flex^® is suitable for sterilization by gamma irradiation and autoclave. It is moldable, bondable and formable, ideal for single-use assemblies, such as tubing with bags manifolds.

Features/Benefits:

• Sealable and weldable either pre- or post- sterilization
• Sterilizable by gamma irradiation and autoclave
• Complies with USP Class VI and ISO standards
• Full Validation Package available for all C-Flex commercial formulations.
• Moldable, bondable and formable for single use assemblies and overmolds
• Pyrogen-free, non-cytotoxic, non-hemolytic
• Remains flexible from -45°C to 135°C
• Significantly less permeable than silicone
• Smooth inner bore for superior fluid flow
• Safe disposable through incineration
• All formulas are Animal-Derived Component Free (ADCF)

• Aseptic sealing disconnections
• Aseptic welding connections
• Sterile dosing and filling
• Buffer and media preparation
• Cell culture operations
• Purification operations
• Diagnostics products
• Biopharma manufacturing
• Single-use fluid transfer sets

With light and kink protection.

Clear. The tubings are marked with inside diameter and compliance with regulations and marked at regular intervals. They resist hardening, discoloration and a variety of chemicals.

• Autoclavable
• Suitable for food
• Non-toxic and contamination-free
• Dimensionally stable
• USP Class VI

MINIPULS 3 tubes for R1, R2, R4 and R8 pump heads
MINIPULS evolution tubes for MF1, MF2 and HF2 pump heads

• Many different inner diameters
• Compatible connectors

Transparent. Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Long working lifespan. Good resistance to acids and alkalis. Food-safe.