Accessories for electrical device

Made of PP. Stackable. Supplied in three parts and are easy to assemble. Alphanumeric grid referenced on top tier for easy identification of samples. Can be used in water baths. With large lateral marking area. Autoclavable.

Solid stem, with loop, capillary yellow enameled, graduation resistant against acids and alkalis. Red filling or environmentally friendly blue filling.

9.726 000: Adapter plug with earthing contact from plug with earthing contact and additional earthing socket to British version 13 A, with fine-wire fuse 3, 5 or 13 A ("non rewireable")
9.726 001: One-way plug adapter from plug with additional earthing contact (CEE 7) to plug Swiss version type 12 ("non rewireable")

Each box contains 1000 tips (5 bags of 200 tips) - except for D10 mL (4 bags of 50 tips) and D5000 (3 bags of 334 tips). Bulk packs are sealed with a zipper lock which can easily be opened for quick access to Gilson’s DIAMOND^® Tips and closed using the rapid-sealing strip to prevent contamination and loss of tips.

Outstanding chemical resistance at operating temperatures from -200 to 260 °C, only 50 µm thickness, the sleeves fit like a second skin without adding bulk, without grip collar, simplifying use of joint clips.

• Memory size: 150.000 measurements
• Usable without software (default settings) (15-minute-interval, without alarm settings)
• Automatic PDF creation
• Free adjustable recording interval: 10 seconds to 24 hours
• Max-Min-Display memory (resettable)
• Time marking functions for measuring results
• Movement sensor for shock recording e.g.: door or windows closing
• Battery lifetime approx. 4 years (recording interval >15 minutes)
• Includes wall mount
• Status- and Alarm-LEDs
• HACCP conformity according EN 12830

• PDF-data logger with display
• Memory size: 100.000 measurements
• Usable without software (default settings) (5-minute-interval, without alarm settings)
• Automatic PDF creation
• Movement sensor for shock recording e.g.: door or windows closing
• Free adjustable recording interval: 10 seconds to 24 hours
• Max-Min-Display memory (resettable)
• Time marking functions for measuring results
• Battery lifetime approx. 4 years (recording interval >15 minutes)
• Status- and Alarm-LEDs
• Includes wall mount

For BlueLine pH electrodes, ScienceLine, IoLine and TopLine.
Cable length: 1 m coaxial cable.

Simple, quick and reliable hand held diagnostic tool to verify cleaning effectiveness and capture, store and manage data for later analysis.

• Compact and easy-to-use
• Rapid results allow immediate corrective action
• To be used with the dry swabs 3M™ Clean-Trace™ UXL100, AQT200 and AQF100

In numerous situations, rapid and contamination-free samples have to be taken. DispoSamplers are perfect for this application. They are cleanroom manufactured, individually packed and always ready to use. Avoid expensive decontamination or cleaning of soiled samplers. Gamma sterilised versions are also available.

MultiDispo: For free-flowing powders and small-grain granulates. Easy emptying through opening in the handle.
ZoneDispo: For free-flowing powders and small-grain granulates. Collected sample can be transported in closed sampler.
TargetDispo: For taking target-point samples from powders and granulates.
PowderDispo: For taking cross-section samples of powdery or slightly cohesive substances.
DispoPicker: For taking cross-section samples from powders and small-grain granulates. With closed tip.
DispoLance: For direct removal and filling of free-flowing powders and small-grain granulates.
MicroDispo: For free-flowing powders and small-grain bulk materials. For small sample quantities (10 ml).

• colour: grey RAL 7035
• exhaust air connection (NW75) on top of the cabinet
• adjusting aids to compensate for uneven floor
• large interior height of 1858mm (Model for two 10 litre bottles interior height of 1246mm)
• lead-through points for pipes, sensors etc. in the ceiling of the cabinet
• complete with mounting rails, rolling ramp, bottle retainer with ratchet straps

• labelling in accordance with EN 14470-2, fire resistance of 90 minutes
• GS approved

White membrane with black grid, for detection of bacteria with dyed media, particle count & microscopy, individually, sterile packaged / non sterile.

Capacitive moisture determination e.g. in agricultural applications.

• No sample preparation or grinding needed with MC2000"s whole grain analysis. To operate, simply select grain type on the interface, place sample (whole kernel) in the vessel and get results automatically
• With results within 5 seconds, the MC2000 is geared for routine grain moisture analysis. Automatic temperature compensation system adjusts any external temperature influences, ensuring accuracy
• With 50 procedures in the library (10 pre-programmed), MC2000 is designed to measure moisture content in a wide variety of grains

For quick and easy measurement of fluoride ions in aqueous solutions. When using the half cell electrodes 9409BN and 9409SC, a separately available reference electrode is needed.

For inoLab^® Oxi 730, ProfiLine 197i/1970i, inoLab^® 740 Oxi, inolab Oxi 7310. Self-stirring oxygen sensor.

• Single-handed use
• High reproducibility
• Ready for immediate use, no polarisation period necessary
• Extremely low internal consumption of oxygen by the electrode
• No zero point calibration necessary
• OxiCal^®-SL calibration and storage vessel included
• 6 months operation with one electrolyte filling
• IMT function compensation
• Membrane leakage monitoring, damaged membranes are indicated

Portable pH meter for field work and laboratories.

• Measurement made easy: A large, well-structured display, intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicks
• Ergonomic design for one handed operation: Thanks to its ergonomic design, handling the FiveGo™ is a comfortable experience. The foldable stand provides optimal viewing on flat surfaces
• IP67 Water and dustproof: The IP67 waterproof protection makes the FiveGo™ portables able to withstand wet and demanding environments

The Thermo Scientific™ Finnpipette™ F1 system delivers performance with precision, all in a lightweight design that maximizes user comfort and reduces strain. It"s the ideal system for applications using expensive reagents and valuable samples. The Finnpipette F1 now takes pipetting to a whole new level with significant new enhancements::

• Volume adjustment is virtually effortless and silent, also enabling one-handed volume changes for convenience.
• Textured adjustment knob provides a feel of confidence when setting volumes. Optional handle strips also enable a firmer grip.
• Lower pipetting forces now reduce Repetitive Stress Injury (RSI) even further without compromising results
• 120° adjustable finger rest - for both right- and left-handed operator comfort
• Soft touch tip ejection combined with the softer collar of Finntip Flex tips reduces ejection forces
• Super blow-out: 150% increase in air boost ensures efficient delivery of micro-volumes and prevents capillary action in 50 µL models and below
• Convenient Color-coding: Finnpipettes and Finntips are colorcoded by volume to make it easy toselect the right pipette and tips
• F1 Finnpipetten are certified to meet standards - ISO 9001, ISO 14001 and ISO 13485.
• 5-year warranty with online registration

• PDF-data logger with display
• Memory size: 60000 measurements
• Usable without software (default settings) (5-minute-interval, without alarm settings)
• Automatic PDF creation
• Free adjustable recording interval (10 seconds to 24 hours
• Max-Min-Display memory (resettable)
• Time marking functions for measuring results
• Movement sensor for shock recording e.g.: door or windows closing
• Battery lifetime approx. 4 years (recording interval >15 minutes)
• Includes wall mount
• Status- and Alarm-LEDs

Vivaspin™ ultrafiltration spin columns for minimal handling and reduced sample loss. Specially designed for rapid, non-denaturing concentration and desalting of proteins and other biological samples. Vertical polyethersulfone (PES) membrane minimizes membrane clogging to ensure high flow rates.

Features & Benefits:

• Dead-stop technology: samples are not concentrated to dryness and allows direct concentrate recovery
• pH compatibility from pH 1 to 9
• Polycarbonate tube design for minimal protein adsorption
• Suitable for sample volumes from 100 µl to 20 ml with a molecular weight cutoff value of Mr 3000 to 100 000

Electronically controlled hot air blower.

Glass shaft, electrolyte KCl 3 mol/l (L7780 with gel electrolyte, L7780 with Referid^® electrolyte), Silamid^® reference system (N 6480 Eth with electrolyte L 5034 and N 6480 eis with electrolyte L 5014).

The Insert Retainer is required for use of the Foam inserts. Please order separately.

Combining a white or black upper structure with an optically clear, flat well bottom polymer base allows for reading from bottom and top, or both. Nunclon™Δ surface modifications are for cell culture optimized. Non-treated plates are ideal for scintillation counting.
Material plates: Polystyrene
Total volume µl/well: 120

• Battery-buffered ControlCOCKPIT - Uninterrupted supply for the entire display unit (ControlCOCKPIT) and therefore complete documentation of all parameters even when there is a power failure. The CO₂ parameter is continuously regulated

• Two gas connections with quick release connectors for automatic switch-over of gas cylinders

• Active microprocessor control for humidifying and dehumidifying (40 - 97 % rh), incl. digital indication and auto-diagnostic system ensures even more rapid reaching of set humidity and very short recovery times while avoiding condensate formation. Humidity supply with distilled water (from an external tank) by a self-priming pump; integral bacteria block by generating hotsteam, dehumidifying via sterile filter

• Control of oxygen concentration by N₂ inlet; adjustment range 1 % up to 20 % O₂;

• Peltier cooling unit, enables a working temperature of 37 °C even at higher ambient temperatures of up to 35 °C

• Further options and accessories, f. ex. special works calibration certificates, subframes, pressure reducing valves on request.

For temperatures up to max. 1200 °C.

DG electrodes are used for pH measurement and titration in difficult samples, low ionic and non-aqueous media.

DM electrodes with silver and platinum rings are suitable for redox titration with and without pH change, e.g. argentometry and Karl Fischer titration.

Plug & Play capable electrodes are automatically recognised by METTLER-TOLEDO pH meters and electrode type, serial number, calibration data and operating hours can be read out and processed by the software.
DG111-SC: For pH measurement and acid/base titration in aqueous media. With S7 screw cap and detachable cable. ARGENTHAL™ reference system.

DGi111-SC: Same as DG111-SC, with Plug & Play functionality.

DG113-SC: For pH measurement and titrations in non-aqueous media. With S7 screw cap and detachable cable. Ag/AgCl/LiCl reference system.

DGi113-SC: Same as DG113-SC, with Plug & Play functionality and ARGENTHAL™/LiCl reference system and improved chemical resistance.

DGi114-SC: For pH measurements and acid/base titrations in clogged and protein or sulfide containing samples. With Plug & Play functionality and ARGENTHAL™ reference system.

DG115-SC: For pH measurements and acid/base titrations in aqueous media. Suitable for use in polar solvents, e.g. titration with perchloric acid in acetic acid or with sodium methylate in methanol and other media with low ion concentration. With S7 screw cap and ARGENTHAL™ reference system.

DGi115-SC: Same as DG115-SC, with Plug & Play functionality.

DGi116-Solvent: Especially suitable for acid/base titrations that require fast response times in non-aqueous media, e.g. TAN/TBN determinations in oils, titrations with perchloric acid, cyclohexylamine and alcoholic HCl, alkalis or Na-Methylate. For determination of epoxy numbers, acid values and saponification numbers, also free fatty acids in polymers, oils/fats and resins. With Plug & Play functionality and ARGENTHAL™/LiCl reference system.

DGi117-Water: For pH measurement and acid/base titrations in aqueous solutions of low ion conductivity and low buffer capacity. With integrated Pt1000 temperature sensor. Suitable for measurements in rain-, surface- and drinking water. With Plug & Play functionality and ARGENTHAL™/LiCl reference system.

The racks can be used with all freezer models. The racks have spring locks mounded on each shelf to secure the cryoboxes. They are available with or without cryoboxes.

For storing of cryo boxes 130 x 130 mm, 133 x 133 mm und 136 x 136 mm.

For storing of cryo boxes 130 x 130 mm, 133 x 133 mm und 136 x 136 mm. With handles.

For the storage of cryoboxes in freezers.

• Suitable for cryoboxes 130 x 130 mm, 133 x 133 mm and 136 x 136 mm
• Without pull-out stop
• Polished surface

• Calibrated to contain IN
• With spout and hexagonal base
• Short line
• DIN EN ISO 4788

Service kit 1: with lid gasket, valve gasket, gasket for exhaust cock and manometer, steam valve
Service kit 2: with lid gasket, control valve gasket, seals for exhaust cock and pressure gauge, steam valve and safety valve
Service kit 3: with door gasket, safety valve and bacteria filter

The K-7400S Semi-Micro Osmometer enables the measurement of osmolality and freezing point of aqueous solutions. Determination of the total concentration of all dissolved particles in a solution. All dissolved components of a liquid are collected and will be displayed in a separate value. This makes it particularly suitable for quality control and research laboratories. The standalone device can optionally be equipped with a printer. Furthermore, the device can be controlled via a PC using the EuroOsmo 7400 software (please order separately).

• Sample volume of only 50 µl
• LCD display
• User-friendly menu guidance
• Fast, easy and automatic measurements
• High reproducibility
• Peltier cooler

The right physical weight and fitting is important for high temperature accuracy inside the sample. All blocks are made out of temperature conductible aluminium. Customized blocks on request. All blocks are autoclavable.

The large handwheel ensures that the loads can be lifted slightly.

• High stability
• Powder coated

Infrared thermometer for non-contact measurement of surface temperature.

• 1:1 optics for fast, easy measurements at close range
• Hold function
• Display of min./max. values
• Scan mode for long-term measurement
• Small and handy

• Flexible recording or transfer of measurements, particularly to Microsoft^® Excel or Access
• For operating systems Windows XP, Vista, 7, 8, 8.1, 10
• Supports balances measuring devices with RS 232, RS 485, Bluetooth, LAN or WLAN network (TCP/UDP/IP)
• Highly flexible formatting
• The interface protocols for KERN balances are already predefined (standard configuration)
• Compatible interface cable included when ordering a KERN balance at the same time
• GLP-compliant lab software

The POWERpro series is perfectly suited to use with all Cleaver Scientific horizontal multiSUB™ systems and omniPAGE mini vertical gel units, and may also be adapted for specialist techniques including the Comet Assay, and clinical and high throughput horizontal electrophoresis.

• Microprocessor controled with 5 sets of power terminals allow simultaneous operation
• Continuous run or timed setting up to 999 minutes
• Programmable with multi step protocols for advanced electrophoresis methods
• Stores preset programs for each Cleaver Scientific electrophoresis system
• Alarm function
• 2.4" TFT display
• Stackable design
• Rigorous in-built safety mechansims
• Automatic crossover
• Dual voltage compatibility

Compatible with:

• Series 360 EP and 360 ES
• Series 490
• Series 320 Moisture analyzers

For universities and educational institutions as well as all laboratories looking for a cost-efficient, yet practical and reliable liquid handling device.

• Light and precise
• Minimized contamination risk with SafeCone filters

Very fast response time. For overhead stirrers EUROSTAR, MINISTAR and MICROSTAR control.

Ink side out.