Ultrasonic cleaner instruments

These devices work at 35kHz and have transducers for maximum cleaning power. SweepTec^® for permanent sound field oscillation ensures even and gentle cleaning. Available with heating with adjustable temperature range from 30 to 80 °C . Power information: High ultrasonic peak power and nominal ultrasonic power 230V, 50/60Hz. All models are spill-proof with stainless steel tanks (RK 102H hard-chromium plated) and outer cases, drip proof (IP32).
For cleaning of technical glassware like burettes, pipettes, petri dishes and laboratory flasks, metal parts of all kinds, electronic components. Also suitable for cleaning and disinfection of medical instruments and acceleration of suspending processes, production of emulsions.

Type RK 102 H and above supplied with outlet
Type H with heating adjustable from 30 to 80 °C

Accessories Suspension baskets for Sonorex ultrasonic baths Accessories Lids for Sonorex ultrasonic baths Accessories Positioning lids for Sonorex ultrasonic baths Accessories Inset baskets for SONOREX insert beakers Accessories Insert tubs for Sonorex ultrasonic baths Accessories Insert beakers for Ultrsonic devices SONOREX / SONOCOOL Accessories  Accessories

The immersion depth of the baskets can be continuously adjusted using the handle adjuster prevents laboratory flasks from floating, tipping over or becoming flooded. Quick and easy attachment to insert baskets or utensil holders (except GH 1).
1 pair.

Mesh width: 1 x 1 mm.
KD 0: Stainless steel wire basket
PD 04: Plastic basket with sieve bottom

Stainless steel.

Optimal ultrasonic wave transmission. Items to be cleaned should not be placed on the bottom of the tank. K 6: round, adjustable.

Accessories Handle adjusters, GV 3 and GV 10, for Sonorex insert baskets

Heavy duty ultrasonic baths for cleaning or sample treatment in aqueous liquids. Suitable for laboratory and respiratory protection area, industry, workshop and service area.

• Stainless steel tank and housing
• Drip water protected
• With integral tank drain tap (G 1/2) for easy emptying (RK 106 with G 1/4)
• Radio shielded

Models with Type addition H with adjustable temperature range.
Ultrasonic bath for cleaning of 1 test sieve with 200 mm diameter. Please order sieve holder SH 7 separately.

Specifications
HF-Frequency:	35 kHz, SweepTec®
Temperature range:	30 ... 80 °C
Timer:	1 ... 15 min or continuous
Power supply:	230 V~, 50/60 Hz

Accessories Lids for Sonorex ultrasonic baths Accessories Utensil and test sieve holder for Sonorex ultrasonic baths Alternative Ultrasonic sieve-bath SONOREX SUPER RK 1040 Alternative Ultrasonic sieve-bath Sonorex Super ultrasonic bath RK 1028 C

Instrument and test sieve holder.
GH 1: Holder for 1L glass flasks, 105mm diameter.
SH 7: Sieve holder for test sieve 200mm diameter.
GH 10/28 instrument holders, stainless steel, mesh size 12.5mm x 12.5mm

Stainless steel.
For covering bath tanks, as outlined below.

For positioning lids and beaker holders.
SD 06, PD 06, EB 05: with retaining ring
SD 05, KB 04, SD 04: with retaining ring, only for DE 08
SD 09: with retaining ring

Stainless steel.
For supporting inset beakers.

Stainless steel. Insert baskets and lids for Technik models. Lids protect against evaporation and reduce operating noise.Baskets for hanging in bath tanks as outlined below.

Stainless steel. Suitable for insert baskets and instrument holders with mesh size up to 12.5mm x 12.5mm and for glass holder GL for DT...F. Essential for the attachment of laboratory flasks.

Unperforated plastic, with cover. For cleaning with aggressive liquids.

• The PC program is designed for operating systems Microsoft^® Windows^® 2000 and Microsoft^® Windows^® XP in connection with the infrared adapter IR 1 allowing a comfortable operation and monitoring of Digitec units.
• The status window gives an updated overview on the working conditions.
• Start time and stop time as well as the respective bath temperature are automatically collected in log files. In this way, documentation of the cleaning process for quality assurance is possible.

Supplied as Winsonic^® DT software and infra-red adapter IR 1.

Ultrasonic special bath for a gentle removal of biofilms.

Scope of supply:
BactoSonic^® 14.2: Ultrasonic bath only
BactoSonic^® 14.2 SET: Ready-to-use Set consisting of

-Ultrasonic bath BS 14.2
-Scientifically proven description of the procedure
-Transport containers:	IB 5, PP, 0.52 l - 2 pcs IB 6, PP, 0.6 l - 2 pcs IB 10, PP, 1.0 - 1 piece IB 18, PP, 1.8 l - 1 piece IB 20, PP, 2.0 l - 1 piece
-Container carriers for transport containers:	BT 5, PC, for 2 pcs IB 5 BT 6, PC, for 2 pcs IB 6 BT 10, PC, for 1 piece IB 10 BT 18, PC, for 1 piece IB 18
-Utensil holder for transport containers:	GH 14, stainless steel, for 3 pcs IB 20
-Frame for foil test:	FT 14
-Contact liquid:	TICKOPUR R 33 - 250 ml (concentrate)

Accessories Container holders, PC for BactoSonic® 14.2 Accessories Transport containers, PP for BactoSonic® 14.2 / SONOCOOL® 255

• Analogue setting of time and shaking frequency
• Reciprocating motion: settings in 4 steps possible of up to 200/min
• Timer: 1 to 15 min, or continuous
• Constant amplitude of 20mm independent of loading
• Rack easy to remove - easy mounting of the laboratory clamps EK 10-250 (separately to order)
• Footprint approx. 410mm x 280mm (L x W)
• Holds 36 x 10ml, 36 x 25ml, 18 × 50ml, 12 x 100ml or 10 x 250ml flasks

An existing SONOREX DIGITEC DT1028 F ultrasonic bath can easily be retrofitted with the shaker attachment SA 1028.

Consisting of:
Ultrasonic bath Sonorex Digitec DT 1028 F

• Especially for sonification of samples in laboratory flasks and for rapid degassing (DEGAS)
• Low-profile, ultrasonic bath with stainless steel tank, inner dimensions 500mm x 300mm x 65mm (L x W x D)
• Housing made of stainless steel, protected against spray, 535mm x 325mm x 205mm (L x W x H)
• Outlet: G½ ball valve
• Timer: 1, 2, 3, 4, 5, 10, 15, 30 min, or continuous
• Ultrasonic peak power 1280W
• Ultrasonic nominal power 320W
• Working frequency 35kHz, SweepTec^®
• Current consumption 1.4A

Shaking device SA 1028

• Analogue setting of time (1 to 15 min, or continuous) and shaking frequency
• Reciprocating motion: settings in 4 steps possible of up to 200/min
• Constant amplitude of 20mm independent of loading
• Rack easy to remove - easy mounting of the laboratory clamps EK 10-250 (separately to order)
• Footprint approx. 410mm x 280mm (L x W)
• Holds 36 x 10ml, 36 x 25ml, 18 × 50ml, 12 x 100ml or 10 x 250ml flasks

• Bench space required for Sonoshake approx. 850mm x 360mm (L x W)

An existing SONOREX DIGITEC DT 1028 F ultrasonic bath can easily be retrofitted with the shaker attachment SA 1028.

Ultrasonic baths in stainless steel housing, time setting 1, 2, 3, 4, 5, 10, 15, 30 min and continuous, Type H with heating, adjustable temperature range from 20 to 80 °C and warning LED at excess temperature, degassing of liquids (DEGAS), Pulse function, SweepTec^®. Power supply 230 V ~, 50/60 Hz.

SONOREX DIGIPLUS DL: Devices additionally with power setting 20 to 100%.

SONOREX TECHNIK - welded tanks.

Capacities up to 230 l and internal tank length up to 1700 mm. Frequency 40 kHz. From RM 110 UH upwards 25 kHz are possible.
Modular range with 6 standard tank capacities in 4 versions (without heating, without ultrasonic on request). For cleaning and rinsing. With integrated ultrasonic generator. Frequencies: 25 kHz (models up to RM 110) or 40 kHz (rest of range). For 220-240 V, 50/60 Hz (RM 110: 210 UH, 400 V, 3 ph. 50/60 Hz, Cekon plug 16 A). With 2 mm thick, stainless steel 1.4404 welded tank. With overflow, drainage outlet and timer 1 to 15 min or can be set for continuous operation. With heating, adjustable temperature range from 30 to 80 °C.

Accessories Accessories for Sonorex Technik ultrasonic baths

RS 232 data interface to the laboratory PC allows processing of individual control tasks and integration into an automated laboratory line.

• Datalogging method is explained and described in a detailed instruction manual.

Winsonic^®DT remote control consisting of: software and infra-red adapter IR 1 - see 9.877 847. Please order separately.

Accessories Remote control WINSONIC® DT for Sonorex Digitec ...-RC ultrasonic baths

Ultrasonic bath for cleaning of 1 test sieve with 500 mm diameter. Please order sieve holder GH 28 separately.

Accessories Lids for Sonorex ultrasonic baths Accessories Utensil and test sieve holder for Sonorex ultrasonic baths Alternative Ultrasonic sieve-bath Sonorex Super ultrasonic bath RK 1028 C Alternative Ultrasonic sieve-bath SONOREX SUPER RK 106

Heavy duty ultrasonic baths for cleaning or sample treatment in aqueous liquids. Suitable for laboratory and respiratory protection area, industry, workshop and service area.

• Stainless steel tank and housing
• Drip water protected
• With integral tank drain tap (G 1/2) for easy emptying (RK 106 with G 1/4)
• Radio shielded

Models with Type addition H with adjustable temperature range.
For 5 test sieves with 200 mm diameter. With handles on both sides. Please order sieve holder SH 28 C separately.

Specifications
HF-Frequency:	35 kHz, SweepTec®
Temperature range:	30 ... 80 °C
Timer:	1 ... 15 min or continuous
Power supply:	230 V~, 50/60 Hz

Accessories Lids for Sonorex ultrasonic baths Accessories Utensil and test sieve holder for Sonorex ultrasonic baths Alternative Ultrasonic sieve-bath SONOREX SUPER RK 1040 Alternative Ultrasonic sieve-bath SONOREX SUPER RK 106