Autoclaves

Service kit 1: with lid gasket, valve gasket, gasket for exhaust cock and manometer, steam valve
Service kit 2: with lid gasket, control valve gasket, seals for exhaust cock and pressure gauge, steam valve and safety valve
Service kit 3: with door gasket, safety valve and bacteria filter

Biological control involves the use of indicators, which check whether all microorganisms were killed during the sterilisation process. The bio-indicators are unique, as they directly indicate how many microbial spores have actually been killed. Thanks to the reliability and quality of the information, the regular use of a bio-indicator can lead to an improvement in the performance of the sterilisation process and thus to better results.

Features:

• No external laboratory is required for performance evaluation
• Easy handling
• Reasonable to use after repairs or maintenance of autoclaves

Application:

• Program 3.5 minutes, holding time at 121 °C or 134 °C
• After sterilisation, break the vial in order to bring the nutrient solution into contact with the spore strip
• Results in 48 hours
• Meets EN ISO 11138 standard

Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.

All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
The fully automated, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST Test, pressure vessel test, ICP - TM 650, food preservation, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. It is operated via of a 7-inch high-resolution tablet. All operating steps are explained with videos directly on the tablet. Compliance with GLP requirements through automatic documentation of users and cycles. Process protocols are stored in the CertoCloud for 10 years. Integration into laboratory data systems possible. For autoclaving liquids, a PT100-media sensor is optionally available.

Scope of suppy: Autoclave, stable instrument panel with 3 feeds, minimum water level indicator, power cable, tablet

Specifications
Chamber diameter:	260 mm
Chamber depth:	350 mm
Air evacuation:	Fractional flow procedure
Chamber material:	Stainless steel 316L
Operating pressure:	2.7 bar
Heating capacity:	1300 W
Power supply:	230 V ±10 % / 50 - 60 Hz

Accessories Accessories for Autoclaves, CertoClav Alternative Tabletop autoclaves CertoClav MultiControl

Accessories Digital vertical autoclaves, AES series

HMT 230/260 FA - for standard tasks:

• Certified according to regulation 93/42/EEC
• Available in 2 sizes with a volume of 16 or 24 liters
• 9 sterilization programs, fully automatic: 121 °C wrapped / unwrapped solid items; with or without drying, 135 °C wrapped / unwrapped solid items; with or without drying, Liquid program: 121 °C, 40 min.
• Controlled by a microprocessor
• Simple digital display
• Water tank
• Electromechanical overheating protection
• Safety valve
• Mechanical pressure-dependent door lock
• Reset/emergency button
• Easy maintenance

HMT 230/260/300 MA - versatile table-top autoclave:

• Certified according to regulation 93/42/EEC
• Available in 3 sizes with a volume of 16, 24 or 40 liters
• Powerful integrated vacuum pump, an essential feature for sterilizing tubes and hollow components
• 7 sterilization programs, fully automatic: 121 °C wrapped / unwrapped (vacuum), 134 °C wrapped / unwrapped (vacuum), Liquid and prion programs, Bowie-Dick test
• Controlled by a microprocessor
• Progress indicator
• Internal water tank
• Electromechanical overheating protection
• Electronic overpressure protection
• Pressure safety valve
• Mechanical pressure-dependent door lock
• Reset/emergency button
• Easy maintenance

HMT 260/300 MB - premium table-top autoclave:

• Certified according to regulation 93/42/EEC
• Available in 2 sizes with a volume of 24 or 40 liters
• Powerful integrated vacuum pump, an essential feature for sterilizing tubes and hollow components
• 5 sterilization programs, fully automatic: Sterilization of wrapped items: 121 °C - 30 min.; 134 °C - 15 min., Sterilization of unwrapped items: 121 °C - 15 min.; 134 °C - 4 min., Individual temperature selection from 105° to 135 °C, Preset prion program
• 3 test programs: leakage test, helix test, Bowie-Dick test
• Controlled by a microprocessor
• Easy operation with a LCD display
• Documentation / data storage via SD card and printer
• Drying program, 1- 60 minutes
• 4 literwater tank, to be filled manually or automatically (purified water)
• Various safety features, e.g. safety valve or pressure-dependent door lock
• With modern design, easy maintenance

Accessories

Due to the intelligent combination of vacuum, pressure and steam, the autoclaves are suitable for liquids and solids of all kinds. The additional media sensor guarantees a complete sterilisation of liquids such as culture media. Solids of all kinds and hollow materials are optimally sterilised with the help of a vacuum pump. The preheatable chamber, cooling-ventilation and vacuum pump guarantees short cycle times from 20 minutes including drying time.

• 7-inch touchscreen
• Including free CertoCloud software for all protocols and programs
• Remote maintenance, alarm system via PC, tablet or smartphone
• Notification by e-mail and SMS
• 12 customisable programs (45 l version with 8 customisable programs)
• Interfaces: USB, WiFi, Ethernet, Bluetooth, SD-Card
• Integrated documentation (GMP/GLP conform)
• Standard interfaces for bar scanner, protocol and label printer

Scope of suppy: Autoclave, tray set, power cable, touchscreen

Specifications
Temperaturrange:	105 ... 134 °C
Cooling system:	Air venting
Chamber material:	Stainless steel 304L
Operating pressure:	2.3 bar
Heater power:	2400 W
Power supply:	220 V ±10 % / 50 - 60 Hz

Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.

All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
The vertical laboratory autoclave with valve control is suitable for sterilisation of unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials, food preservation, culture media preparation and waste. A precision manometer with drag pointer and a precision thermometer ensure that operations and processes are precise. This autoclave is available in two versions, each with two temperature levels. Pressure control via valve, temperature control via thermostat. Pressure valves are not interchangeable, because the thermostat of the device is perfectly adapted and calibrated to the valve.

Scope of supply: Autoclave, stable instrument panel with 3 feeds, minimum water level indicator, power cable

Specifications	EL 12 // EL 18
Chamber diameter:	240 mm
Chamber depth:	260 // 390 mm
Air evacuation:	Free steam flow process
Chamber material:	Aluminium
Operating pressure:	2.7 bar
Heating capacity:	1900 W
Power supply:	230 V ±10 % / 50 - 60 Hz

Accessories Accessories for Autoclaves, CertoClav Alternative Tabletop autoclaves CertoClav MultiControl

Small, robust and cost effective with its stainless steel casing. The Minichiller is the smallest Unichiller in the world. Minichillers are available with air or water-cooled refrigeration systems, illuminated level indicator, overflow and drain on the front. The filling port is on the top of the unit. All models use natural refrigerants as standard. Minichillers have suction and pressure pumps and therefore have the advantage of have a high flow at low pressure. This is particularly interesting for all pressure sensitive applications (e.g. glass condensors).

Supply req.:

230 V 50/60 Hz

This autoclave is microprocessor controlled and monitored with 10 sterilisation programmes of which 4 are fixed and 6 are freely selectable and has bacteriological filters included by default.

• Operating temperature range 100 °C to 134 °C
• On request, also available with B Class
• RS 232 interface
• Fully automatic functions
• With water reservoir, pre-vacuum and drying
• Case and lid shrouding are AISI 304 stainless steel
• Sterilisation chamber, lid and sealing system are AISI 316 stainless steel
• Electrical heating with protected heating elements
• Safety pressure valve
• Safety thermostat
• Automatic steam controlled by Touch Screen microprocessor
• Manual valves for emptying the sterilisation chamber and for draining steam
• Equipped with mesh stand on the chamber base and trays
• Supply requirements: 230 V 16 A single phase

These autoclaves are microprocessor controlled and monitored with 10 sterilisation programmes of which 4 are fixed and 6 are freely programmable.

• Operating temperature range 100 °C to 134 °C
• On request also available with with vacuum pump and steam generator
• Agar modus (40 °C to 80 °C)
• RS 232 interface
• Timer
• Programmable auto-start (24 h)
• Fully automatic functions
• Case and lid shrouding are AISI 304 stainless steel
• Sterilisation chamber, lid and sealing system are AISI 316 stainless steel
• Electrical heating with protected heating elements in the interior of the chamber
• Safety pressure valve
• Safety thermostat
• Automatic steam controlled by microprocessor
• Manual valves for emptying the sterilisation chamber and for draining steam
• Supply requirements:

AES-12 and AES-75: 230 V 16 A single phase
AES-110 and AES-150: 400 V + Neutral (3-phase)

Accessories Accessory baskets for Digital vertical autoclaves, AES series

Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.

All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
The PT100 sensor-controlled, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST test, pressure vessel test und ICP - TM 650, food preservation, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. Basic version of PC software for data monitoring is included. With this software, you can only set single-step programs. For multi-step programs, PC software professional version is required.

The CertoClav MultiControl 2 Touch is additionally equipped with a 7-inch robust high-resolution tablet. The operating steps are explained with videos on the screen.

• Programmable from 1 minute to 30 days and from room temperature to 140 °C
• Automated process control and error detection
• USB port
• Printer port (RS232) for printing sterilisation protocols

Scope of suppy:
MultiControl 2: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controller
MultiControl 2 touch: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controller, tablet

Specifications
Chamber diameter:	260 mm
Chamber depth:	350 mm
Air evacuation:	Fractional flow procedure
Chamber material:	Stainless steel 316L
Operating pressure:	2.7 bar
Heating capacity:	1300 W
Power supply:	230 V ±10 % / 50 - 60 Hz

Accessories Accessories for Autoclaves, CertoClav Alternative Tabletop autoclaves CertoClav MultiControl

The compact and space saving table top units of the Laboklav 25 series provides you most applications of bigger table top units:

• sterilisation of liquids in open and lightly closed vessels, also with air re-cooling system
• sterilisation of instruments, also with pre-vacuum and drying vacuum
• waste sterilisation at 134 °C
• optional exhaust air filtration system
• volume of chamber: 25 l
• max. permissible pressure: 2.8 bar
• sterilising temperature: 98 to 138 °C

A unique design meets innovative technical solutions:

• optimal use of chamber volume - sufficient for 5 x 1 l standard bottle incl. cap
• lid made of temperature resistant safety glass and lid cover made of safety glass
• LED front lightning to visualise cycle progress
• motor driven and self-checking closing mechanism
• flexible temperature reference sensor PT100 as serial function
• Thermolocking device according to IEC 61010-2-40

Chamber volume/Chamber size	25L useable , Ø 265mm x 465mm Chamber illumination by white LED light
Load:	e.g. 5 x 1L bottle up to 5kg instruments
Dimensions (W x D x H): Space requirement on the table: Weight:	440mm x 540mm x 660mm 440mm x 550mm + 110 for door overhang approx. 65kg
Max permissible pressure (PS): Max. permissible temperature (TS):	2.8 bar 138°C
Chamber material:	Stainless steel, chamber lid made from temperature proof safety glass
Housing:	Powder coated, red; Front cover from transparent safety glass; Process illumination (LED) in Blue, Red and Green
Steam generation:	Integrated steam generator with dry heating elements
Heating power: Electrical connection:	2kW 230V ~ 50 Hz, 16A
Lid closing system:	Motorized closing system
Sterilisation temperature: Feed water supply:	98 to 135 °C, adjustable Integrated feed water tank with manual filling
Exhaust steam condensing:	Included, discharge into integrated condensate tank
Thermo locking acc. to IEC 61010-2-43 (TRB 402):	Integrated with flexible reference temperature sensor opening, temperature adjustable
Control:	Micro processor with LCD Display; Code protected access to programming levels; Serial interface RS 485; Internal storage chip to store cycle data of approx. 150 cycles, visualisation and print out at a later stage is possible
Programms:	Up to 10 programms, depending on the integrated option, all programmes can be individualized
Norms and regulations:	Manufactured in Germany in full compliance with the relevant norms and regulations. Serial approval by German TUV, CE marking according Pressure Device Directive (Commissioned by factory service at an additional cost)

Accessories Accessories for Steam steriliser Laboklav 25

• Certified according to the Pressure Equipment Directive 2014/68/EU
• Available in 2 sizes with 50 and 80 liters of effective usable volume
• Innovative locking system with motorized lid including pressure and temperature monitoring
• Steam generation in the chamber
• High energy efficiency and long service life
• Rapid cooling for short cooling times
• Also available with flexible temperature sensor for the sterilization of liquids
• Timer function and 4 program groups with 3 sub-groups each, including night and dissolution program, adjustments for customized programs are always possible
• No water/waste-water installation required
• Castors for mobile use
• Easy to clean plastic surface with rounded edges in contact areas (no burns or injuries).
• Electrical, mechanical and constructional factors guarantee the highest level of quality and user protection
• The accessories make it possible to configurate the autoclave according to your wishes
• Exhaust air filters for laboratories of safety level S2 and higher are also available

Specifications
Automatic start:	1 minute to 7 days, Night programme
Time of sterilization:	1 to 300mins.
Power supply:	220-240V a.c.
Sealing:	at the push of a button, fully automatic
Boiler material:	SUS304 (rust resistant, stainless steel)

Accessories Accessories for HG series steam sterilisers

Tireless, durable and ingeniously simple

• Certified according to the Pressure Equipment Directive 2014/68/EU
• Available in 4 sizes with 25, 50, 85 and 110 liters of effective usable volume
• Simple, reliable and with a long service life, your perfect choice for standard tasks
• Optionally available with flexible temperature sensor for the sterilization of liquids
• For all devices up to 110 liters only a single-phase power supply (220/240 V; 50/60 Hz) is required
• Timer function and 3 program groups with a max. of 6 programs including dissolution program, adaptions for customized programs are always possible
• No installation to a feed water supply required
• Castors for mobile use
• Easy to clean plastic surface with rounded edges in contact areas (no burns or injuries)
• Electrical, mechanical and constructional factors guarantee the highest level of quality and user protection
• The accessories make it possible to configurate the autoclave according to your wishes
• Exhaust air filters for laboratories of safety level S2 and higher are optionally available

Accessories Accessories for HV series steam sterilisers

Laboklav 80 series provides an extensive and diversified range of equipment variants - customized for you laboratory application. The focus is on safe and reproducible processes, safety for the user and the environment as well as a comfortable operation of the autoclave. All steam steriliser are:

• suitable for the liquid sterilisation in open and lightly closed vessels, solid sterilisation and waste sterilisation at 134°C
• upgradable for high demanding laboratory applications
• volume of chamber: 80l
• max. permissible pressure: 2.8bar
• sterilising temperature: 98°C to 138°C
• motor driven and self-checking closing mechanism
• flexible temperature reference sensor PT100 as serial function
• Thermolocking device according to IEC 61010-2-40

A unique installation concept for varied installation possibilities:

• The autoclave can be installed as vertical or as horizontal unit - without additional costs!
• The lid can optionally be opened to the right, to the left or backwards.
• All units can be delivered in three colours: red, green or blue.

Numerous equipment variants:

• vacuum system for difficult to de-aerate solids incl. fractionated pre-vacuum and drying vacuum
• fast re-cooling system for liquid sterilisation using a double jacket, without rejection of demineralised water
• upgrade of the re-cooling system with counter pressure and fan possible - for further reduction of batch times
• optional exhaust air filtration system

Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.

All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
CertoClav Classic is the result of further development of the EL, but made of corrosion-resistant, electropolished stainless steel. Suitable for sterilisation of unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials, food preservation, culture media preparation and waste. A timer is integrated.

Scope of suppy: Autoclav, stable instrument panel with 3 feeds, minimum water level indicator, power cable

Specifications
Chamber diameter:	260 mm
Chamber depth:	350 mm
Air evacuation:	Free steam flow process
Chamber material:	Stainless steel
Operating pressure:	2.7 bar
Heating capacity:	1300 W
Power supply:	230 V ±10 % / 50 - 60 Hz

Accessories Accessories for Autoclaves, CertoClav Alternative Tabletop autoclaves CertoClav MultiControl

Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.

All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
The PT100 sensor-controlled, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST test, pressure vessel test und ICP - TM 650, food preservation, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. Basic version of PC software for data monitoring is included. With this software, you can only set single-step programs. For multi-step programs, PC software professional version is required.

• Programmable from 1 minute to 30 days and from room temperature to 140 °C
• Automated process control and error detection
• USB port
• Printer port (RS232) for printing sterilisation protocols

Scope of suppy: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controller

Specifications
Chamber diameter:	240 mm
Chamber depth:	260 mm
Air evacuation:	Fractional flow procedure
Chamber material:	Aluminium
Operating pressure:	2,7 bar
Heating capacity:	1900 W
Power supply:	230 V ±10 % / 50 - 60 Hz

Accessories Accessories for Autoclaves, CertoClav Alternative Tabletop autoclaves CertoClav EL

Small laboratory table-top autoclave with round chamber for sterilization tasks of various kinds. A hinged lid with electromotive locking mechanism in combination with the robust lip seal ensures easy and safe closing of the sterilization chamber. A temperature lock in the liquid program prevents opening at temperatures higher than 80 °C and therefore unwanted boiling delay. For an exact control the autoclave has an electronic absolute pressure sensor and a flexible temperature sensor PT100 Kl. A.

• Loading capacity: 10 media bottles or 6 Erlenmeyer flasks (500 ml)
• Safe and simple locking device
• Completely made of stainless steel
• Fits on any laboratory bench

Equipment versions
Basic Lab: With heating elements. For the sterilization of simple materials or liquids without dry removal.
Dry Lab: With heating elements, membrane-vacuum pump. For the sterilization of non-infectious waste bags and materials which require intensive subsequent drying.
Quick Lab Basic: With heating elements, water-cooling system, internal heat exchanger. For the sterilization of large quantities of liquids.
Quick Lab: With heating elements, water-cooling system, internal heat exchanger, membrane-vacuum pump. For the sterilization of non-infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying.
Safe Lab: With heating elements, membrane-vacuum pump, exhaust air filtration EAF. For operation in the level S2 lab. Recommended for the sterilization of infectious waste bags and materials which require intensive subsequent drying.
Complete Lab: With heating elements, membrane-vacuum pump, exhaust air filtration EAF, water-cooling system, internal heat exchanger. Fully equipped laboratory autoclave for operation in the level S2 lab. Recommended for the sterilization of infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying.

Specifications
Chamber volume:	25 l
Permissible operating pressure:	3.8 bar absolute
Permissible operating temperature:	140 °C
Heat output:	2.5 kW
Chamber dimensions (Ø x D):	300 x 360 mm
Outer dimensions (W x D x H):	450 x 640 x 525 mm
Weight basic unit:	45 kg
Power supply:	240 V, 50 Hz, 16 A

Laboratory table-top autoclave with round chamber for sterilization tasks of various kinds. A hinged lid with electromotive locking mechanism in combination with the robust lip seal ensures easy and safe closing of the sterilization chamber. A temperature lock in the liquid program prevents opening at temperatures higher than 80 °C and therefore unwanted boiling delay. For an exact control the autoclave has an electronic absolute pressure sensor and a flexible temperature sensor PT100 Kl. A.

• Loading capacity: 24 medium-flasks or 17 Erlenmeyer flasks (500 ml)
• Safe and simple locking device
• Completely made of stainless steel
• Fits on any laboratory bench

Equipment versions
Basic Lab: With heating elements. For the sterilization of simple materials or liquids without removal dry.
Dry Lab: With heating elements, membrane-vacuum pump. For the sterilization of non-infectious waste bags and materials which require intensive subsequent drying.
Quick Lab Basic: With heating elements, water-cooling system, internal heat exchanger. For the sterilization of large quantities of liquids.
Quick Lab: With heating elements, water-cooling system, internal heat exchanger, membrane-vacuum pump. For the sterilization of non-infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying.
Quick Lab Advanced: With steam generator, water ring vacuum pump, water-cooling system, internal heat exchanger, air recirculation valve, steam/air mixture method (SAMM). For the sterilization of non-infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying. This also applies to liquids in closed containers.
Safe Lab: With heating elements, membrane-vacuum pump, exhaust air filtration EAF. For operation in the level S2 lab. Recommended for the sterilization of infectious waste bags and materials which require intensive subsequent drying.
Complete Lab: With heating elements, membrane-vacuum pump, exhaust air filtration EAF, water-cooling system, internal heat exchanger. Fully equipped laboratory autoclave for operation in the level S2 lab. Recommended for the sterilization of infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying.

Specifications
Chamber volume:	65 l
Permissible operating pressure:	3.8 bar absolute
Permissible operating temperature:	140 °C
Heat output:	6.0 kW
Chamber dimensions (W x D x H):	310 x 680 x 310 mm
Outer dimensions (W x D x H):	700 x 820 x 644 mm
Weight basic unit:	125 kg
Power supply:	400 V, 50 Hz, 16 A

Steam sterilisers are availible in wide range of chamber sizes between 55 l and 195 l, universal installation options as a free-standing or tabletop unit and numerous configurations provide individual solutions meeting your specific requirements. Typical areas of application for our units include all microbiological laboratories in research institutions, universities, quality controls in the pharmaceutical and food industries as well as waste sterilization, for example in the field of medical diagnosis. Laboklav series autoclaves are characterized by their reliability and quality. We manufacture our products exclusively in Germany to high and continuously monitored quality standards. Our units are TÜV-certified and approved for series production. They comply with the following standards:

• Pressure Equipment Directive 97/23/EU
• DIN 58950: Sterilization - Steam sterilizers for pharmaceutical products
• DIN 58951: Sterilization - Steam sterilizers for laboratory use

No accessories included, please inform us in your order if a horizontal or vertical device is required.

Specifications	55 | 100 | 135 | 160 | 195
Chamber volume:	55 l | 100 l | 135 l | 160 l | 195 l
Chamber dimensions (Diam. x D):	410 x 460 mm | 410 x 760 mm | 500 x 660 mm | 500 x 760 mm | 500 x 990 mm
Outer dimensions of free-standing unit (W x H x D):	740 x 765 x 600 mm | 740 x 1065 x 600 mm | 840 x 965 x 700 mm | 840 x 1065 x 700 mm | 840 x 1215 x 700 mm
Outer dimensions of tabletop unit (W x H x D):	740 x 600 x 765 mm | 740 x 600 x 1065 mm | 840 x 700 x 965 mm | 840 x 700 x 1065 mm | 840 x 700 x 1215 mm
Weight:	115 kg | 185 kg | 195 kg | 210 kg | 245 kg
Max. allowable pressure (PS):	2,8 bar
Max. allowable temperature (TS):	143 °C
Heating power of steam generator:	3-6 kW, selectable | 6 kW, selectable | 6-10 kW, selectable | 6-10 kW, selectable | 10 kW
Electrical connection:	3N 400 V ~, 50 Hz, 16 A
Sterilization temperature:	98 ... 135 °C, adjustable

Accessories Accessories for Steam steriliser Laboklav 25 Alternative Steam steriliser Laboklav 25

Maximum comfort at a low price, that is what LABOKLAV ECO series autoclaves stand for. They allow simple laboratory applications such as:

• Sterilization of liquids in open or slightly closed bottles, also available with an air recooling system
• Instrument sterilization
• Waste sterilization at 134 °C (thermal inactivation)
• Optional exhaust air filtration

Specifications	135
Chamber volume:	135 l
Chamber dimensions (Diam. x D):	500 x 660 mm
Outer dimensions (W x H x D):	840 x 965 x 700 mm
Weight:	~ 195 kg
Max. allowable pressure (PS):	2,8 bar
Max. allowable temperature (TS):	143 °C
Heating power:	6 kW
Electrical connection:	3N 400 V ~, 50 Hz, 16 A
Sterilization temperature:	98 ... 135 °C, adjustable

Accessories  Alternative Steam steriliser Laboklav 25 Alternative Steam steriliser LABOKLAV 55 - 195