Solvent storage/handling

Filter

 Flexible connecting system for DURAN® GL 45 flasks

DWK

For safe transfer of liquid media within a closed and sterile system (evaporation is reduced).

  • Screw closure GL 45 with two, three or four ports GL 14 thread
  • Autoclavable
  • Temperature restistant up to max. 140 °C
  • Flexible modular system
  • Sterile pressure equalisation is possible through use of a membrane filter
  • Unused ports can be provided with a blind cap
...

 Safety Caps V2.0, GL 45

SCAT

For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.
Scope of suppy:
Safety Cap, air valve, change indicator, PFA fittings, PFA blind plug, labelling field...

 Reagent bottles DURAN®, pressure resistant

DWK

DURAN ® reagent bottles, DIN thread, ISO 4796. Pressure resistance, as a result of amended shape, in the range of -1 up to +1.5 bar (tested by the TÜV in accordance with DIN EN 1595, with GS mark). Neutral / Type 1 glass in accordance with USP/EP. With Retrace code (Batch identification). Certificate available via the Internet. Autoclavable....

 Fittings for SafetyCaps / SafetyWasteCaps

SCAT

Fittings with integrated ferrule for SafetyCaps and SafetyWasteCaps.
Use the blind plugs to tighten connectors which are temporarily inactive or not in use....

 HPLC bottles, DURAN® complete system 4-port screw cap

DWK

For sterile transfer of media or for feeding solvent to HPLC instruments. The bottle is pressure/vacuum resistant from -1 to +1.5 bar (tested by TÜV in accordance with EN 1596, GS marked). Complete with a 4-port screw cap (autoclavable, reusable) made from PP, 4 connection screw caps (black, M8 thread) and silicone seal. Suitable for tube diameters of 1.6mm and 3.2mm. Spare parts are available individually. Further connection system components for the GL45 thread are available upon request (Tubing not included). Neutral / Type I glass acc. to USP/EP. With Retrace Code (Batch Identification), with certificate available via the internet. Autoclavable....

 HPLC starter kits Generation 2.0, GL 45

SCAT

Maximum safety for HPLC solvent supply. The integrated air valve (B) blocks hazardous vapours and cleans the inflowing air (M) from dust and dirt particles.

  • Protection against escaping solvent vapours
  • Solvents (L) und and mixtures remain clean and stable
  • No twisted tubing, easy container exchange
  • No air intake in to the HPLC system
  • Reproducible analytical results through stable mobile phase
  • Use the supplied blind plugs to tighten connections which are temporarily inactive or not in use
...

 Adapters for exhaust filters

SCAT

Space problems in the lab? Use the adapters for the exhaust filter to gain more free space. Attach the exhaust filter in any position - perfect when dealing with lower installation heights....

 Flanged Tubing, PTFE, PA

Bohlender

Flanged PTFE tubing with black tube end fittings UNF ¼" 28 G made of PP and washers made of PA. The tubing is ready for use. Temperature resistant from 0 to +100 °C, pressure resistant up to 30 bar, universal chemical resistance....

 Collectors for tube connector for SafetyWasteCaps

SCAT

Collectors for additional parts to add more tubings and capillaries. Delivered with fittings.
Further configurations available on request....

 Inlet filter for solvents

SCAT

HPLC solvent filters for 3.2mm OD tubing....

 SafetyWasteCaps with mechanical level control

SCAT

The red floater is immediately visible when the container has reached the critical fill level. Perfect for canisters of opaque material, where the fill level is not visible from the outside.

  • Approved S.C.A.T. technology of the SafetyWasteCaps
  • Different thread sizes
  • Connections for capillaries and tubings
  • Mechanical or electronic (E) level control
  • With connection for S.C.A.T. exhaust filters
...

 Scrubber Adapter for Bottles, PTFE

Bohlender

Consisting of PTFE body with connecting nut and two lateral GL18 threaded necks, a 300mm long FEP inlet tube and a gas distributor with frit. Easy in- and outlet of gas by means of rigid-walled tubing (e.g. PTFE) which can be connected to the threaded necks using Bola Laboratory Screw Joints. Elastic tubing can be connected by means of hose connectors. Inlet tube can be individually shortened. Special feature: the body of the adapter can be turned independently from the connecting nut. This means, that the completely assembled adaptor can be removed and fixed onto another bottle without the risk of disarranging the tubing. Suitable for bottles with GL45 or GLS80 threads and capacities between 100ml and 5000ml....

 Thread adapters for SafetyCaps / SafetyWasteCaps, female / male thread

SCAT

Use SafetyCaps and SafetyWasteCaps also for bottles with GL40 or GL38 thread. Further adapters in different thread sizes are available on request....

 Tube fittings for the tube connector Safety Waste Caps

SCAT

Connectors for variable tube connector sizes on Safety Waste Caps.
Further configurations available on request....

 HPLC Safety Set Generation 2.0

SCAT

HPLC Safety Set HPLC Safety Set Generation 2.0 suitable for all HPLC Systems
Complete system for safe extraction and disposal of solvents.

One single set for Solvent supply and Waste:

  • 4x SafetyCap III HPLC Safety Set (Generation 2.0) GL45
  • 4x Air valve HPLC Safety Set (Generation 2.0) comes with SafetyCap III
  • 4x Solvent bottle 1 L, GL45, glass
  • 10x Blind plug for capillary connections
  • 5x Fittings ID 2.3 mm violet
  • 5x Fittings ID 3.2 mm blue
  • 5x Fitting ID 1,6 mm green
  • 5x Fittings ID 3.2 mm yellow
  • 1x Tube fitting, curved, 6.4-9.0 mm (comes with SafetyWasteCap GL45)
  • 1x SafetyWasteCap HPLC Safety Set (Generation 2.0) GL45
  • 1x Exhaust filter HPLC Safety Set (Generation 2.0) size M
  • 1x Container 5 L, GL45, HDPE
  • 2x Tube fitting, straight, 6-8 mm
  • 1x Tube fitting, angled, 9.5-10 mm
...

 Replacement parts and accessories for HPLC bottle distributors

Bohlender

...

 Accessories for Filtration Cabinets LABOPUR® 12.X Series

ECOSAFE

...

 b.safe-Caps, GL45, PPS

Bohlender

Screw cap for thread GL 45 made of PPS, freely turnable distributor body made of PTFE with female threads UNF ¼" 28 G for connecting capillary tubing (O. D. 3.2 mm) or a b.safe air valve with service life indicator.

Scope of supply:
Cap A: 2 x connections, 1 x fitting (PFA), 1 x air valve...

 Bottle attachments, PFA/PP

Metrohm

...

 Thread adapter, G1/2" (m) on thread GL25 (m)

SCAT

Connection straight, with O-ring from EPDM....

 Safety funnels with hinged lid, V2.0, black, HDPE, electrostatic conductive

SCAT

This compact funnel with lid is optimally suited for restricted space conditions in the laboratory. The hinged lid closes the funnel clean and safely. The removable sieve collects magnetic stirrers and solid substances during fluid discharge.

  • Chemically resistant HDPE
  • With removable sieve for easy cleaning
  • Different thread sizes with free rotatable cap
  • Safety lance ensures clean outflow without contaminating the container opening
  • Lance length: 200 mm
  • Also available without safety lance
  • Chromatography vials can be disposed completely when the sieve is removed
  • Black Safety funnels are made of electrostatic conductive HDPE and have a grounding connection to avoid ignition risks. Grounding cable (1.5 m) and grounding clamp are included
...

 HPLC bottle distributors

Bohlender

Made of glass-fibre reinforced polypropylene (PP). Up to four tubes (preferably PTFE) can be connected to bottles at once. Distributors can be screwed on to any container with a GL45 neck via the screw cap. Supplied with all accessories (screw caps, silicone rings or O-rings, sealing caps) for immediate use. Choice of model; with, or without stopcock....

 Capillary PTFE

SCAT

Length: 3 m...

 SafetyWasteCaps SymLine®, HDPE

SCAT

Connection systems for waste containers with electrical level control system (SymLine built-in signal box or SCAT signal box T1/T5). The closed safety systems ensure reliable protection in the laboratory. Connection GL 25....

 SafetyWasteCaps for HPLC waste

SCAT

Collect fluid waste safely for protection of health and environment: SafetyWasteCaps block hazardous solvent vapours and provide safe pressure equalisation within the waste container. Due to high end materials, the caps are chemically resistant even against aggressive organic solvents.

  • The exhaust filter (A) catches escaping solvent vapours (B)
  • The active carbon (C) provides an active filtering surface of 1.200m²/g - optimised for solvent vapours
  • Pre-filter (D) for optimised air flow
  • Afterfilter (E) provides safe enclosure and keeps the filter clean
  • Tubing and capillaries remain safely fixed (F)
  • No twisted tubing, freely rotatable cap enables easy container exchange (G)
...

Add to shopping cart