Temperature data logger

The single-use data logger TempMate-S1 with its built-in USB connector, is the ideal solution for low-cost temperature monitoring of transports. TempMate-PDF loggers directly useable with pre-programmed configuration or reprogrammable with Tempbase Software according to each customer"s specifications. To download the recorded data, simply connect TempMate-S1 directly to the USB port. A PDF and CSV report will automatically be generated, covering temperature graph, detailed data list and statistical information. No hardware (cable, interface) or software is required.

• Auto generating PDF and CSV format data report
• 110 days run time 16000 measurements, 10 minuteinterval
• Reprogrammable with Tempbase Software free of charge
• Up to 5 alarm points configurable
• Integrated USB connector
• LED Alarm indicators
• Serial number sticker
• Inclusive certificate
• Food proof according to HACCP

Specifications
Temperature range:	-30 ... 70 °C
Accuracy:	±0.5 °C at -20 ... +40 °C / ±1.0 °C in remaining range
Resolution:	0.1 °C
Data memory:	16000 measurements
Recording cycle:	110 days
Sampling interval:	10 min
Shelf life:	24 months
Dimensions (L x W x H):	80 x 47 x 7 mm
Weight:	14.6 g
IP code:	IP 67 / NEMA 6
Certifications:	Calibration Certificate, EN 12830 S, T, C, D, 1

The mini data logger for temperature, testo 174T, is ideal for accompanying transports. Simply positioned close to the goods, e. g. in containers and refrigerated rooms, the data logger monitors temperature continuously, securely and unobtrusively. The software ComSoft Basic is available as a free download and allows fast programming of the data logger as well as easy data analysis.

• High data integrity, even with empty battery
• Large measurement data memory
• Watertight in accordance with IP65
• Compact and robust
• Conforms to EN12830
• Issue of alarms via display
• Data transfer to the PC via USB interface
• Reliable temperature measurement for the monitoring of sensitive goods and cold chain during storage and transport

Scope of supply:
testo 174T: Mini data logger, 1-channel, incl. wall bracket, batteries (2 x CR 2032 lithium), calibration protocol
testo 174T-Set: Mini data logger, 1-channel, incl. USB interface for programming and reading out the logger, wall bracket, batteries (2 x CR 2032 lithium), calibration protocol
testo 174T Starter kit: 3 x mini data loggers, USB interface, wall bracket, batteries (6 x CR2032 lithium), calibration protocol

Probe type:	Internal NTC temperature sensor
Measuring range:	-30 to +70 °C
Accuracy:	±0.5 °C
Resolution:	0.1 °C
Operating temperature:	-30 to +70 °C
Storage temperature:	-40 to +70 °C
Battery type:	2 x 3 V button cell (CR 2032)
Battery life:	500 days (15 min measuring cycle, +25 °C)
Protection class:	IP65
Measuring cycle:	1 min to 24 h (can be selected)
Memory:	16000 readings
Software:	Can be used with Windows XP / Vista / 7 / 8 / 8 Pro / 8 Enterprise / 10

Accessories Accessories for testo data loggers 174 / 175 / 176 / 184

PDF data logger with different temperature sensors.

• For temperature monitoring related to HACCP / IFS issues or other perishable goods
• Transportation of fresh, cool and deep cool products
• Monitoring of fridges and deep freezers
• Evaluation without software, PDF are automatically generated
• Minimise training, user errors and IT costs using EBI 300"s simple, easy to use design and standard software
• Ensure data integrity since no data manipulation is possible
• EN 12830, ATP, VO(EG) 37/2005 Compliant
• Factory calibration certificate included
• Programmable via the free online configurator at www.ebi300.com
• No separate interface for programming and reading

EBI 300: PDF data logger with internal temperature sensor
EBI 300 TE: PDF data logger with external temperature sensor, internal temperature sensor can be used additionally
EBI 300 TH: PDF data logger with external humidity and temperature sensor, internal temperature sensor can also be used

Specifications
Ambient Temperature: Measuring range Temp. EBI 300 / 300 TH: Measuring range Temp. EBI 300 TE:	-30 to +70 °C -30 to +70 °C -35 to +70 °C
Measuring range Humidity EBI 300 TH:	0 to 100 % rF
Accuracy Temperature:	±0.5 °C (-20 to +40 °C), ±0.8 °C for remaining range
Accuracy Humidity:	± 3 % (10 to 90 % rh), ± 5 % for remaining range
Resolution Temperature / Humidity: Memory: Sensor:	0.1°C / 0.1 % rh 40,000 samples NTC for temperature
Battery life time:	up to two years
Measuring period:	1 minute to 24 hours
Maximum Start Delay:	72 h
Housing material:	Polycarbonate
Measuring modes:	Start/Stop, endless loop, start with button
Alarms:	2 values, high and low limits
Weight:	35 g
IP code:	IP 65

Wireless temperature data loggers for storage rooms and refrigerated cabinets.

• Readout via wireless interface
• Replaceable battery
• High protection class IP67
• LCD display
• Memory for 288 values

EBI 25-T: With internal NTC temperature sensor
EBI 25-TE: With external NTC temperature sensor

The IF 400 base station and the Winlog.web / Winlog.wave PC software (see "Accessories for EBI 25 data loggers) are required for programming and evaluating the EBI 25-T/TE data loggers.

Scope of supply: Temperature data logger, operating manual

Specifications
Sensor: Channels: Measuring cycle:	NTC 1 1 min. ... 24 Hrs. user definable
Measuring range EBI 25-T: Measuring range EBI 25-TE:	-30 ... 60 °C -40 ... 85 °C
Accuracy EBI 25-T (±1 digit):	±0.5 °C (-20 ... 40 °C) ±0.8 °C (40.1 ... 60 °C)
Accuracy EBI 25-TE (±1 digit):	±0.5 °C (-20 °C ... 40 °C) ±0.8 °C (-30 °C ... -20 °C; 40 °C ... 60 °C) ±1.5 °C (-40 °C ... -30 °C; 60 °C ... 85 °C)
Resolution:	0.1 °C
IP code:	IP 67
Battery life:	approx. 2 years
Operation and storage temperature:	-30 ... 60 °C / -40 ... 85 °C
Dimensions (W x D x H):	48 x 27 x 95 mm
Power supply:	1 x Lithium battery 3.6 V, replaceable

Accessories Accessories for EBI 25 data loggers Alternative Wireless temperature data logger EBI 25-TX

Applications:

• Transport
• Storage monitoring
• Refrigeration areas and cold rooms

Features:

• Waterproof
• Visual alarm
• Max / min values on display
• Stores 40000 readings, can be read off at any time
• Replaceable battery

Scope of supply:
EBI 20-T1: Temperature Logger
EBI 20-T1-Set: Temperature Logger, evaluation software, Interface
EBI 20-TE1: Temperature Logger with external probe
EBI 20-TE1-Set: Temperature Logger with external sensor, evaluation software, Interface

Specifications
Measuring range temperature:	-30 to +70 °C
Accuracy temperature:	±0.5 °C (-20 to +40 °C); ±0.8 °C for remaining measuring range
Resolution temperature:	0.1 °C
Memory:	40000 samples
Sensor:	NTC
Operating temperature: Storage temperature:	-30 to +70 °C -40 to +70 °C
Measuring period:	1 minute to 24 hours
Measuring mode:	immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressed
Power supply:	3 V lithium (CR 2450), can be replaced by user
IP code:	IP 67
Housing :	ABS
Dimensions (L x W x H):	69 x 48 x 22 mm
Weight:	approx. 45 g

Accessories Accessories for Data Logger EBI 20-T1 / EBI 20-TE1 / EBI-20 TH1

The LOG32T is perfectly designed for product transportation or storage applications. Ambient conditions in power plants.

• Memory size: 60 000 measurements
• Usable without software (default settings) (15-minute-interval, without alarm settings)
• Optional free of charge software download for alarm setting and free adjustable recording interval (30sec to 24h)
• Automatic PDF creation
• Battery lifetime > 3 years (recording interval >15 minutes)
• Status and Alarm-LEDs, acoustic signal
• Includes wall mount
• HACCP (EN12830) conform
• IP65 watertight

Specifications
Measuring range:	-40 ... +70°C
Accuracy:	±0.5°C (-10 ... +40°C), otherwise ±1.0°C
Resolution:	0.1°C
Memory:	60 000 measurements
Interface:	USB (integr.)
Housing:	ABS
Dimensions (L x W x H):	100 x 19 x 19mm
Weight:	70g
Battery:	1 x 3.6 Volt Lithium ½ AA

Alternative Data logger LOG32THP

Temperature-humidity-pressure logger with integrated USB-interface and automatic PDF-creation, inclusive wall mount.

• Memory for 3 x 60000 measurements
• Useable without software (default settings with 5 minuteintervals)
• Automatic PDF creation (no drivers required), optional software download
• Free adjustable recording interval 30 seconds up to 24 hours (via Software Log Connect)
• Battery lifetime > 2 years (recording interval >15 minutes)
• Statusand alarm-LEDs

Specifications
Measuring range:	-40 ... +70 °C, 0 ... 99 %rh, 300 ... 1100 hPa
Accuracy:	±0.5 °C (-10 ... 40 °C) ± 3 % (40 ... 60 % rh), ±1 hPa (900 ... 1100 hPa) otherwise 0.5 %
Resolution:	0.1 °C / 0.1 %rh / 0.1 hPa
Memory:	3x 60 000 measurements
Interface:	USB (intergr.)
Housing:	ABS
Dimensions (L x W x H):	102 x 20 x 21 mm
Weight:	70 g
Battery:	1x 3.6 V lithium 1/2 AA

Alternative Data Logger LOG32T

Universal digital force gauges for tension and compression tests with integrated measuring cell.

• Turnable display with backlight
• Digital force gauge with internal sensor
• Data interface RS-232
• Selectable measuring units: N, lb, kg
• Peak-Hold function to capture peaks (measurement result will be "frozen" for a short time) or Track function mode for a continuous measurement indication (period of time approx. 10 s)
• Function to set limits, programming of Max./ Min., in pull and push direction, with output of acoustic and optical signal. Ideal mode for efficient and accurate testing of standard parts
• Auto-Power-Off
• Internal memory for up to 10 measurements
• Mini Statistics Kit: calculates the average result from up to ten stored single results, min., max., n
• Can be mounted on all SAUTER test stands

Scope of supply:
Force gauge, carrying case

Specifications
Resolution:	up to 10,000 points (total measuring range)
Internal measuring frequency:	0.5 % of Max
Internal measuring frequency:	2000 Hz
Overload protection:	150 % of Max
Thread:	M6
Dimensions (W x D x H):	66 x 36 x 230 mm
Net weight:	approx. 0.64 kg
Power supply:	Battery powered, internal

Alternative

Adapter for EBI 310 to measure two temperatures parallel. Please order 2 sensors separatly.
Further sensors available on request.

Specifications TPX 310
Measuring range (sensor):	-200 to +400°C
Working range (logger):	-30 to +70°C
Accuracy:	±2.0°C to -200 to -100°C ±1.0°C to -100 to -20°C ±0.2°C to -20 to +60°C ±0.5°C to +60 to +250°C ±1.0°C to +250 to +400°C
IP code:	IP 65
TPX 310-P1
Measuring range:	-200 to +200°C
Cable:	PTFE, 3 meters

Accessories High Precision PDF Data Logger EBI 310

Wireless temperature data logger for low temperatures. With external temperature sensor.

• Measuring range down to -200 °C
• External temperature sensor with 3 m cable
• Readout via wireless interface
• Replaceable battery
• High protection class IP67
• LCD display
• Memory for 288 values

The IF 400 base station and the Winlog.web / Winlog.wave PC software (see "Accessories for EBI 25 data loggers) are required for programming and evaluating the EBI 25-TX data logger.

Scope of supply: temperature data logger, operating manual

Specifications
Sensor: Channels: Measuring cycle:	PT1000, Binder series 620 1 1 min. ... 24 Hrs. user defineable
Measuring range:	-200 ... 199.9 °C
Accuracy (±1 digit):	±2.0 °C (-200 °C ... -100 °C) ±0.5 °C (-100 °C ... -20 °C) ±0.2 °C (-20 °C ... 60 °C) ±0.5 °C (60 °C ... 199.9 °C)
Resolution:	0.1 °C
IP code:	IP 67
Battery life:	approx. 2 years
Operation and storage temperature:	-30 ... 60 °C / -40 ... 85 °C
Dimensions (W x D x H):	48 x 27 x 95 mm
Power supply:	1 x Lithium battery 3.6 V, replaceable

Accessories Accessories for EBI 25 data loggers Alternative Wireless temperature data loggers EBI 25-T/TE

PDF data logger with different temperature sensors. Compared to the EBI 300, the EBI 310 is characterized by shorter measuring intervals and higher storage capacity.

• Automatic pdf-report creation with temperature/time values
• Transport of drugs, inoculants, blood products and primary products
• Transport of all temperature sensitive products
• Storage of reference samples in refrigerators and deep-freezers
• "Traffic light principle" by limit exceeded
• IQ/OQ procedures through standardized software and standard reporting process possible
• GMP, pharmaceutical law compliant; EN 12830, ATP, VO (EG) 37/205 compliant, 21 CFR Part 11 conform (Winlog.basic)
• Programmable via the free online configurator at www.ebi300.com

EBI 310: Data logger with internal temperature sensor
EBI 310 TE: Data logger with external precision temperature sensor, internal temperature sensor can be used additionally. Measurements in high and low temperature range
EBI 310 TH: Data logger with external humidity and temperature sensor, internal temperature sensor can be used additionally. Monitoring the relative humidity in storage and transport
EBI 310 TX: Data logger with temperature dual adapter for two exchangeable temperature sensors (not included in the scope of supply), internal temperature sensor can be used additionally

Specifications
Ambient temperature: Measuring range temp. EBI 310 / 310 TH: Measuring range temp. EBI 310 TE:	-30 to +75 °C -30 to +75 °C -200 to +250 °C
Measuring range humidity EBI 310 TH:	0 to 100 % rh
Accuracy temperature:	± 0.2 °C (-30 to +30 °C); ± 0.5 °C for remaining range
Accuracy humidity EBI 310 TH:	± 3 % (10 to 90 % rh)
Resolution temperature / humidity:	0.1 °C / 0.1 % rh
Memory capacity: Sensor:	120,000 measurements Pt1000/NTC
Battery life time:	up to two years
Measuring period:	1 s to 24 h
Maximum start delay:	72 h
Housing material:	Polycarbonate
Measuring modes:	Start/Stop, endless loop, start with button
Alarms:	5 values
Weight:	35 g
IP code:	IP 65

Accessories External 2-channel probe for USB Data Logger EBI 310

Large display for actual value, battery status display, easy to use software. Perfect designed instrument for monitring transportation or storage after HACCP.

• Quality surveillance in laboratories, at the production or in the storage
• Ambient conditions in manufacturing facilities
• Ambient conditions in power plants
• Monitoring of fridges for the pharma industry
• Memory for 60000 data sets
• Waterproof IP 65

Please order Software with USB-Cabel separately (9.726 413).

Specifications	LOG100 // LOG100 Cryo
Measuring range int.: Measuring range ext.:	-30 ... 70 °C // -10 ... 70 °C -50 ... 125 °C // -200 ... 350 °C
Accuracy:	0.1 °C
Precision:	±0.5 °C (-20 ... 50 °C), otherwise ±0.7 °C // Int.:±0.3 °C (-20 ... 50 °C), otherwise ±0.7 °C, Ext.: ±0.5 °C (-200 ... 250 °C), otherwise ±1.0 °C
Housing:	Plastic (ABS)
Battery:	1 x CR2032
Dimensions:	92 x 55 x 21 mm // 88 x 55 x 20 mm
Weight:	95 g
Alarm function:	Alarm for too low or too high temperatur and/or humidity values Calibration reminder

Accessories Accessories for Temperature data logger LOG100/LOG100 Cryo

Temperature data logger with 2 connections for external temperature sensors, e.g. immersion sensor, surface or air sensor. Data is stored even if the battery is changed or empty.

• Suitable for rough environmental conditions
• Protected against splashing and jetting water
• With the appropriate temperature sensors, temperatures from -50 to 1000 °C can be measured and recorded
• Memory for 1 million values
• With easy-to-read LCD display
• Battery life up to 3 years
• With Mini USB connection and SD card slot
• Software for reading out the values is available as free download on the manufacturer"s website

Scope of supply: Temperature data logger with 2 connections for external temperature sensors type T and type K, wall bracket, lock, batteries, calibration protocol

Specifications
Channels:	2 x external
Measurement cycle:	10 sec. ... 24 Hrs. user definable
Measuring range:	-50 ... 1000 °C
Accuracy ±1 digit:	±0.5 °C (-50 ... 70 °C) ±0.7 % (+70.1 ... 1000 °C)
Resolution: IP code:	0.1 °C IP65
Battery life: Operation and storage temperature: Dimensions (W x D x H):	3 years -20 ... 55 °C 55 x 30 x 95 mm
Power supply:	3 x AAA

Accessories Accessories for testo data loggers 174 / 175 / 176 / 184 Accessories  Accessories  Accessories  Accessories Thermocouples with TC adapter for testo measuring instruments Accessories Immersion tip for testo measuring devices Accessories  Accessories Batteries, lithium Accessories  Alternative  Alternative

Accessories for EBI 25 temperature and humidity data loggers.

For use at temperatures below -10 °C.

For process monitoring and quality assurance with reliable and stable measuring results. For resistance thermometers Pt100, thermocouples, NTC"s, and many more parameters.

• Inputs for more than 65 ranges
• Up to 2 input connections for measuring at 2 different places
• 4 channels per input, e.g. for double sensors
• 2 outputs: USB, V24, Ethernet, Bluetooth
• Max.-/Min value, Average value for time, single values or measuring points
• Multilingual: German, English, French
• Evaluation: Dataand measuring intervals can be evaluated with Software

Temperature probes not included. Please order separately.

Specifications
Temperature resolution:	0.01 K
Memory:	99 values (expandable up to 25000)
Dimensions (L x W x D):	127 x 83 x 42 mm
Weight:	290 g
IP code:	IP54
Power supply:	3 x Mignon Alkaline or mains adapter

Accessories Metal sensors Pt 100 with hand grip for PHYSICS 100 Accessories Metal sensor Pt 100 with adapter sleeve VA for PHYSICS 100 Accessories Glass sensor Pt 100 with adapter sleeve for PHYSICS 100 Accessories Metal sensor Pt 100 with PTFE/FEP coating for PHYSICS 100 Accessories Accessories for high precision thermometers PHYSICS Alternative High precision thermometer PHYSICS 1000

Data logger with motion sensor, integrated USB interface for automatic PDF output and wall mount. For internal temperature measurement and recording. With connection for an external PT100 temperature sensor.

• Freely adjustable recording interval from 10 seconds to 24 hours
• Min- and Max-values can be reset in the display
• Time marking function ("Time Marker") during data recording
• With movement sensor for shock recording
• Memory for 100000 measurements
• Automatic output as PDF file, device can also be used without software
• No driver installation needed
• Status and alarm LEDs, with buzzer
• Display can be switched off
• Battery life 4 years at > 15 min measuring interval
• Software available for download on the manufacturer"s website (free of charge)

Temperature sensors are available as accessory.

Scope of supply: Data logger, wall mount, battery, USB cover, screws and dowels

Specifications
Temperature range internal: Temperature accuracy internal:	-40 ... 70 °C ±0.4 °C (-10 ... 40 °C), otherwise ±1 °C
Temperature range external: Temperature accuracy external:	-200 ... 850 °C ±0.2 °C or 0.3 % (the greater value applies)
Temperature resolution:	0.1 °C
Housing:	ABS
Dimensions (W x D x H):	42 x 20 x 91.5 mm
Weight:	70 g
Power supply:	1/2 AA 3,6 V

Accessories Accessories for data logger LOG200E / LOG220E / LOG210 TC

• Immersion resistance temperature probes Pt 100, class A, 4-wire connection
• Connection-wire Teflon/Silicone isolated, with PHYSICS-Plug 0,01 K resolution
• Probe made of stainless steel 1.4571 or glass N 16 B, Metalprobe also available with insert tip
• Instrument and thermometer combination, optional, available with calibration

Robust temperature data logger for industrial use mith metal body and 4 connections for external temperature sensors type T, K or J. Data is stored even if the battery is changed or empty.

• High protection class IP65
• Storage for up to 2 million values
• Battery life up to 8 years
• With Mini USB connection and SD card slot
• Software for reading out the values is available as free download on the manufacturer"s website

Temperature sensors that are required for using the temperature data logger are separately available.

Scope of supply: Temperature data logger with 4 connections for external temperature sensors (please order separately), turn holder, lock, batteries, calibration protocol

Specifications
Channels:	4
Measurement cycle:	1 s ... 24 h / 2 s ... 24 h (online measurement)
Measurement range:	-195 ... 1000 °C
Accuracy ±1 digit:	±1 % (-200 ... -100.1 °C) ±0.3 °C (-100 ... 70 °C) ±0.5 % (70.1 ... 1000 °C)
Resolution: IP code:	0.1 °C IP65
Battery life: Operation and storage temperature: Dimensions (W x D x H):	8 years -35 ... 70 °C / -40 ... 85 °C 63 x 33 x 103 mm
Power supply:	1 x Li TL-5903

Accessories Accessories for testo data loggers 174 / 175 / 176 / 184 Accessories  Accessories Thermocouples with TC adapter for testo measuring instruments Accessories  Accessories  Accessories Immersion tip for testo measuring devices Accessories Batteries, mignon cells Accessories  Accessories  Alternative Temperature data logger testo 176 T1 Alternative Temperature data logger testo 176 T4 Alternative Temperature data logger testo 176 T2

Temperature logger with connections for 4 external temperature sensors of type K, T or J, e.g. immersion/puncture sensors, surface or air sensors. Data is stored even if the battery is changed or empty.

• Suitable for rough environmental conditions
• With the appropriate temperature sensors, temperatures from -200 to 1000 °C can be measured and recorded
• Memory for 2 million values
• Easy-to-read LCD display
• Battery life up to 8 years
• With Mini USB interface and SD card slot
• Software for reading out the values available as free download on the manufacturer"s website

Sets with different temperature sensors also available.

Scope of supply: Temperature logger testo 176 T4 with connections for external temperature sensors type K, T or J (please order separately), wall bracket, lock, battery, calibration protocol

Specifications
Channels:	4 x external
Measurement cycle:	1 s ... 24 h / 2 s ... 24 h (online measurement)
Measuring range:	-200 ... 1000 °C
Accuracy ±1 digit:	±1 % (-200 ... -100.1 °C) ±0.3 °C (-100 ... 70 °C) ±0.5 % (70.1 ... 1000 °C)
Resolution: IP code:	0.1 °C IP65
Battery life: Operation and storage temperature: Dimensions (W x D x H):	8 years -20 ... 70 °C / -40 ... 85 °C 63 x 33 x 103 mm
Power supply:	1 x Li (TL-5903)

Accessories Accessories for testo data loggers 174 / 175 / 176 / 184 Accessories Thermocouples with TC adapter for testo measuring instruments Accessories  Accessories  Accessories  Accessories Immersion tip for testo measuring devices Accessories Batteries, mignon cells Accessories  Accessories  Alternative Temperature data logger testo 176 T2 Alternative Temperature data logger testo 176 T3 Alternative Temperature data logger testo 176 T1

Robust, HACCP conform temperature data logger mith metal body and internal PT100 temperature sensor. Data is stored even if the battery is changed or empty.

• High protection class IP68
• Storage for up to 2 million values
• Approved for use in the food industry acc. to EN 12830
• Battery life up to 8 years
• With Mini USB connection and SD card slot
• Software for reading out the values is available as free download on the manufacturer"s website

Scope of supply: Temperature data logger with internal PT100 sensor, turn holder, lock, batteries, calibration protocol

Specifications
Sensor:	PT100 internal
Channels:	1
Measurement cycle:	2 sec. ... 24 Hrs. user definable
Measurement range:	-35 ... 70 °C
Accuracy ±1 digit: Resolution	0,4 °C 0.01 °C
IP code:	IP 68
Battery life: Operation and storage temperature: Dimensions (W x D x H):	8 years -35 ... 70 °C / -40 ... 85 °C 63 x 33 x 103 mm
Power supply:	1 x Li (TL-5903)

Accessories Accessories for testo data loggers 174 / 175 / 176 / 184 Accessories  Accessories Batteries, mignon cells Alternative Temperature data logger testo 175 T3 Alternative Temperature data logger testo 176 T2 Alternative Temperature data logger testo 176 T4